Hammond C2T2423VFLG1 24x23 Vented Fan Top Panel, 4 Grills, Light Gray

The C2T2423VFLG1 is a vented fan top panel from the C2TF Series, sized 24 x 23 and finished in ASA61 light gray. It replaces a plain cabinet top with four fan grill openings dimensioned for 4.70 in (119 mm) fans, so integrators, network managers and facilities teams can either let heat escape passively through the grills or add 4-inch fans later for active cooling. The ordering table lists this part as "Fan Grill for Fan or Venting" with 4 grill-only positions, no thermostat and no cable entry grommets.

Construction follows the series standard of 14-gauge steel, with mild steel as the base material and a powder coat finish. The light gray powder coat is GREENGUARD, TSCA and RoHS compliant, supporting indoor air quality and environmental requirements. The part is RoHS and REACH compliant, USMCA compliant, TAA-compliant and manufactured in North America (country of origin CA), and carries cruus and EAR99 classifications for procurement and export documentation.

Mounting uses the included CLPKIT832-6 cabinet hardware kit. Per the assembly instructions, 8-32 U-clip nuts are installed on the top of the cabinet frame, the top panel is set in place and secured with the supplied 8-32 x 1/2 screws using a Phillips screwdriver. C2TF Series tops are designed for use with the C2, C2RR, C4, C4RR_A, C4RR_S, C4RR_D, H1, RCK or CLC cabinet series; H1 cabinets require the H1TC Series for mounting.

Because the grills are open for venting rather than pre-wired, C2T2423VFLG1 suits deployments where airflow needs may change: leave it passive now, then fit 4-inch fans as heat loads rise. Shipping weight is 5 lbs (2.27 kg). If you need a sealed top instead, the series notes the C2TS Series; for overhead cable entry, the C2T_BF Series.