Hammond C2T2423FLG1 4-Cutout Cabinet Fan Top Panel, Light Gray

The C2T2423FLG1 is a light gray cabinet fan top panel from the C2TF Series, supplied with four 4.70 in (119 mm) openings that can be fitted with fans, left open for cable entry, or covered in any combination. It is intended for IT, network, telecom, AV and broadcast teams who need to set up or change a cabinet's top-of-rack airflow and cable-entry strategy without replacing the cabinet.

Construction is 14-gauge steel with a powder coat finish in ASA61 light gray (identified on the drawing as painted RAL7035 textured); the base material is mild steel. The finish is GREENGUARD, TSCA and RoHS compliant, supporting indoor air quality and environmental compliance requirements. The part is TAA-compliant and manufactured in North America, with cRUus and TAA listed among its standards.

Overall panel dimensions on the drawing are 25.00 in (635 mm) by 23.00 in (584 mm), with six 0.22 in (6 mm) mounting holes and 4.56 in (116 mm) diameter fan cutouts on a 4.12 in (105 mm) by 2.06 in (52 mm) pattern, each with four 0.19 in (5 mm) fan screw holes. Shipping weight is 5 lbs (2.27 kg).

This configuration is an opening-only version: no fans, thermostat or CFM/dB rating are included, and 4 in AC fans (DNFK4AC120) are ordered separately. Cable entry is optional on this model. CLPKIT832-6 cabinet mounting hardware is included, and assembly follows the series top panel instructions: install the 8-32 U-clip nuts on the cabinet frame, set the panel in place, loosely start the supplied 8-32 x 1/2 screws with a Phillips screwdriver, then tighten.

C2T2423FLG1 is designed for use with C2, C2RR, C4, C4RR_A, C4RR_S, C4RR_D, H1, RCK or CLC cabinet series; H1 cabinets require the H1TC Series for mounting.