Hammond 1422N4S16F24F 72x72x24 Deep 316 Stainless Floormount Enclosure

The 1422N4S16F24F is the deepest enclosure in the 1422 N4 SS series, doubling the depth of the 12 in models to give room for bulkier hydraulic, pneumatic, electrical or electronic controls and instruments. It is a Type 4X two door floormount built from 12 gauge 316 stainless steel for hosed-down, very wet or corrosive locations.

The body is 72.13 in H x 72.06 in W x 24.69 in D (1,832 x 1,830 x 627 mm), and the drawing shows 24.06 in of usable depth with an 84.13 in overall height on welded 12 in floor stands. Two 34.00 in doors open onto twin 32.55 in wide, 69.38 in high door openings, with 32.39 in of clear space available on each door. A removable 10 gauge inner panel of 68.00 x 68.00 in (1727 x 1727 mm) in white powder coating mounts on collar studs and panel supports, and the removable center post makes installation easier.

• Smooth, continuously welded seams with no knockouts, cutouts or holes
• Continuous hinges with removable stainless steel hinge pins and heavy duty stainless clamps
• Seamless poured-in place gasket and formed lip to exclude flowing liquids
• Provision for padlocking, literature pocket, bonding and grounding studs for each door
• Heavy duty stainless lifting eyebolts with reinforcing support angles

At 945 lbs (428.64 kg) the 1422N4S16F24F ships on a skid. It carries UL 508A and CSA Type 3R, 4, 4X and 12 ratings under UL File E65324 and CSA Cert. LR21001, complies with NEMA Type 3R, 4, 4X, 12 and 13 and IEC 60529 IP66, and is RoHS and REACH compliant. The finish is natural stainless steel with a smooth brushed surface.