Hammond PCJ1086L 10x8x6 Solid Cover Polycarbonate Box, Mounting Feet

The PCJ1086L is a Type 4X polycarbonate junction box with a solid light gray polycarbonate cover, sized at a 10 x 8 in face with a 6 in nominal depth. It is built to insulate and protect controls and components indoors or outdoors, for pump controls, waste water, irrigation, solar/wind and chemical plants.

The box and cover are injection moulded polycarbonate thermoplastic that is easily punched, cut or drilled, with enhanced UV inhibitors against outdoor weathering (UV rating f1 per UL746C). The cover closes with a single lockable 316 stainless steel snap latch located on center, and the snap latch includes a provision for padlocking. The matching polycarbonate cover is solid, with the light gray finish of the polycarbonate material. A captive, oil resistant FIP polyurethane gasket provides a positive seal. The molded hinge uses a 316 stainless steel hinge pin. Wall thickness is .16 in (3.96 mm).

Nominal size is 10 in x 8 in x 6 in (254 mm x 203 mm x 152 mm); the enclosure measures 9.93 in (252 mm) high, 8.15 in (207 mm) wide and 5.98 in (152 mm) deep, with a shipping weight of 6 lbs (2.72 kg). Threaded #10-32 brass inserts are provided for mounting the optional PCJR0907 inner panel, which measures 8.75 in (222 mm) by 6.88 in (175 mm). The drawing lists optional back panel thicknesses of 0.100 in (2.54 mm) aluminum, 0.075 in (1.91 mm) white steel or 0.188 in (4.78 mm) PVC.

It ships with four polycarbonate mounting feet for surface mounting; the drawing calls out 4X .32 in (8.17 mm) mounting holes. Stainless steel 316 screw fasteners are used and mounting hardware is included. The solid-cover PCJ1086L is UL 508A and cUL (CSA 22.2 No. 94) Type 1, 2, 3, 3R, 4, 4X, 12 and 13, meets the same NEMA types and IP66, is V-0 per UL 94, and is RoHS and REACH compliant. Operating temperatures run from -35 °C to 130 °C (-31 °F to 266 °F), with an impact index of 16 J (12 ft/lb).