Hammond HYW20168SS 20x16x8 In Hygienic Stainless Wallmount Enclosure

HYW20168SS is a 20 in high, 16 in wide, 8 in deep member of the HYW Series of Hygienic Type 4X Stainless Steel Wallmount Enclosures. It is designed to enclose electrical and electronic equipment and protect it in harsh, hygienic environments, giving integrators a taller vertical layout than the square 16 in model while keeping the same 16 in width.

Construction starts with formed, smooth 304 stainless steel, with every seam continuously welded and ground smooth and a natural #4 dairy finish on the cover and body. A 25° sloped top sheds water and gives room to consider mounting controls. The door closes on 316 stainless steel quarter-turn hygienic latches that require a tool to open; stiffeners are fitted where required, and an internal alignment guide helps prevent door sag.

The door swings 105 degrees on interior hinges that are easily removed to reverse the swing or to modify the enclosure on site. Its hygienic blue silicone gasket runs around the whole door edge and lifts off for cleaning or replacement; the replacement part is HYG2016. For internal equipment, collar studs accept the optional 18P1713 inner panel (17.00 in x 13.00 in, sold separately), and a hardware kit with panel mounting nuts is included.

• Enclosure: 20.00 in (508 mm) H1 x 16.00 in (406 mm) W x 8.00 in (203 mm) D
• Overall height with sloped top: 23.03 in; overall depth: 8.86 in
• Door opening: 17.25 in x 13.54 in
• Clear space available on door: 13.88 in x 10.17 in

Mounting is left to you: there are no pre-drilled wall holes, so the HYW20168SS can be welded in place or set on stand-offs. A bonding stud is on the door and a grounding stud is installed in the enclosure. It is listed UL 508A and cUL Type 3R, 4, 4X and 12, meets NSF/ANSI 169, complies with IP 66, IP69 and IP69K, and ships at 38 lbs (17.24 kg).