Hammond 1455T1601BK 160 x 165 mm Black Anodized Aluminum Enclosure, IP54

The 1455T1601BK is a 1455 series extruded aluminum PC board enclosure in black anodize, sized 6.3 in x 6.5 in x 2.05 in (160 mm x 165 mm x 52 mm). It is the black anodized version, a dark finish that ships with black screws. Designed to house PC boards or for equipment interfacing, it suits electronics engineers, OEMs and integrators building instruments, controllers and interface units.

The body is extruded aluminum with a minimum thickness of 0.06" (1.5 mm) and carries an IP54 rating on the part page. The drawing note specifies the box is made from extruded aluminum 6063 and the bezels from polycarbonate. PC boards mount horizontally by sliding into internal slots extruded into the body; maximum board size is 159.5 mm long by 159 mm wide, and the drawing notes the extrusion is designed for a 160 mm wide PC board. It is one of the enclosures with a removable sliding plate.

As the metal end panel version it includes two flat aluminum end panels colour matched to the housing, two black open plastic bezels, four adhesive rubber feet and #6 x 3/8" thread rolling steel end panel screws with a #4 flat head phillips drive in a black finish (replacement pack: 1455MS100BK, quantity 100). Recommended screw torque is 5 lbf-in. The drawing shows a 160.00 ± 0.50 mm extrusion length and 169.50 mm [6.673 in] x 55.63 mm [2.190 in] overall width and height at the end plates. A plastic end panel version of this colour is available as 1455T1602BK.

Optional flange end panels (1455TF) allow surface mounting, and factory modification (milling, drilling, printing) plus STEP or IGES solid models are available. The 1455T1601BK ships shrink wrapped at 1.24 lbs (0.56 kg) and is REACH and RoHS compliant.