Hammond 1427NCGPG7LG PG7 Extra-Long Gray Nylon Cordgrip, IP68

The 1427NCGPG7LG is a gray (RAL 7035) extra-long PG7 liquid-tight cordgrip made of nylon. The extra-long body gives an inner thread length (T) of 0.59 in (15 mm), nearly double the 8 mm of the standard PG7, for small cables entering or leaving an enclosure.

An NBR (nitrile rubber) seal and a large opening let the nylon gland accept a wide range of cable diameters, and the strain relief elements tighten in a circular sequence on the sealing ring to hold the cable without twisting or damaging it. A nylon locknut and EPDM o-ring are included.

• Thread size (D): PG7 (extra long)
• Mounting hole: 0.51 in (13 mm)
• Wire diameter min.: 0.12 in (3 mm)
• Wire diameter max.: 0.28 in (7 mm) per ordering table; 3.5 mm per part drawing
• Outer length (L): 0.83 in (21 mm)
• Inner thread length (T): 0.59 in (15 mm)
• Guide torque: sealing nut 0.8–1.5 N-m, locknut 1–2 N-m

Because the two sources disagree on the maximum cable diameter for the 1427NCGPG7LG, confirm the fit for your cable. The part provides IP68 protection, is designed to meet NEMA Type 4, 4X, 6, 6P, 12 and 13, is UL listed with a UL94 V-2 flammability rating, and is RoHS and REACH compliant. Operating temperature is -40°C to 100°C static (up to 120° instantaneous) and -20°C to 80°C dynamic (up to 100° instantaneous).