Hammond EN4SD303012S16 30x30x12 Type 4X 316 Stainless Wallmount Enclosure

The EN4SD303012S16 pairs a large 30 x 30 in face with 12 in (305 mm) of depth in 316 stainless steel. This Eclipse Series wallmount enclosure is designed to enclose electrical and electronic equipment and protect it against harsh, industrial environments, and suits panel shops housing deeper devices on a big square back panel.

It is formed 14 gauge 316 stainless steel with continuously welded seams ground smooth, a formed lip that excludes flowing liquids and contaminants, and a seamless poured-in-place gasket. The door runs on hidden hinges with stainless steel hinge pins and is secured by Type A stainless steel slotted quarter turns. The natural stainless finish is smooth and brushed on both cover and enclosure.

Per the drawing, inside depth is 12.70 in and depth including the door 12.84 in, with a 28.49 x 28.49 in door opening and clear space on the door dimensioned at 28.00 and 24.65 in. Rear mounting holes are 0.50 in diameter on 28.50 x 28.50 in spacing. Sizes wider than 24 in (600 mm) require an inner panel to maintain UL/CSA; the EP3030 panel (28.20 x 28.20 in) fits the collar studs provided.

Ratings: UL 508A and CSA Type 3R, 4, 4X and 12, compliance with NEMA 3R, 4, 4X, 12 and 13 and IEC 60529 IP 66. A mounting foot kit is required to maintain UL/CSA external mounting requirements. The included hardware kit supplies panel mounting nuts and sealing washers for the wall holes. Shipping weight is 87 lbs (39.46 kg). The 304 version is EN4SD303012SS.