Hammond C2T1931F10CELG1 550 CFM 10-Inch Fan Top Panel With Cable Entry

The C2T1931F10CELG1 is a pre-wired fan top panel from the C2TF Series, built for IT, network, telecom and AV teams that need active cooling at the top of a rack cabinet plus a route for cables in the same panel. It combines a single factory-wired 10 in (254 mm) fan rated 550 CFM free-flow air delivery with grommeted access holes, so exhaust airflow and overhead cable entry are handled by one assembly. The finish is ASA61 light gray; the equivalent black version is C2T1931F10CEBK1.

Construction is 14-gauge mild steel with a powder coat finish that is GREENGUARD, TSCA and RoHS compliant, and the fan finger guard is chrome plated. The fan is rated 115 VAC, 50/60 Hz, 0.29 amps and ships with a 6 ft power cord, with a measured sound level of 60 dB. This model does not include a thermostat; thermostat-controlled variants exist elsewhere in the series.

Drawing dimensions for the panel are 603.25 mm [23.750 in] by 508.00 mm [20.000 in], with a 226.50 mm [8.917 in] fan opening and cable access holes with covers. The 1931 top size is listed for C2 cabinets 23.00 in wide by 31.50 in deep and C4 cabinets 24.00 in wide by 36.00 in deep, and the series is designed for C2, C2RR, C4, C4RR_A, C4RR_S, C4RR_D, H1, RCK or CLC cabinet series (H1 requires the H1TC Series for mounting).

Installation is straightforward: 8-32 U-clip nuts are installed on the cabinet frame, the panel is set in place and secured with the supplied 8-32 x 1/2 in round head screws using a Phillips screwdriver. Six screws and six speed nuts are supplied, and the series includes CLPKIT832-6 cabinet mounting hardware. C2T1931F10CELG1 is cURus recognized to UL507 and CSA C22.2 No. 113, TAA-compliant and made in Canada.