Hammond C2T1923F10LG1 Light Gray 550 CFM 10-Inch Cabinet Fan Top Panel

The C2T1923F10LG1 is a pre-wired fan top panel for rack cabinets, supplied in ASA61 light gray with a single factory-wired 10 in (254 mm) tube axial fan rated at 550 CFM free flow air delivery and 60 dB. It is intended for IT, network, telecom, AV and broadcast teams that need to convert a passively cooled cabinet into an actively cooled one, or to add extract capacity above high heat load equipment.

Construction follows the C2TF Series platform: 14-gauge steel for durable enclosure protection and long-term reliability, with a powder coat finish that is GREENGUARD, TSCA and RoHS compliant. The drawing specifies a painted steel top with a chrome plated finger guard over the fan opening, which is a 9.000 in (228.60 mm) diameter cutout. This version of the panel does not include a thermostat and does not include cable entry grommets; thermostat and cable entry variants exist elsewhere in the series.

The fan is rated 115 VAC, 50/60 Hz, 0.29 Amps and is supplied with a 6 ft power cord, so the assembly arrives wired and ready to plug in. Mounting hardware is included — CLPKIT832-6 cabinet mounting hardware, listed on the drawing as 6 round head 8-32 x 1/2 in screws and 6 speed nuts. Assembly is straightforward with a Phillips screwdriver: install the 8-32 U-clip nuts on the cabinet frame, set the top panel assembly in place, loosely start the screws, then tighten.

C2T1923F10LG1 fits C2 cabinets 23.00 wide x 23.63 deep and C4 cabinets 24.00 wide x 31.50 deep, plus all sizes of H1 and RCK cabinets; the series is designed for C2, C2RR, C4, C4RR_A, C4RR_S, C4RR_D, H1, RCK and CLC cabinets, with H1 requiring the H1TC Series for mounting. The panel is cURus Recognized to UL507 and CSA C22.2 No. 113 and is TAA-compliant, manufactured in North America.