Hammond C2T1923F10CEBK1 550 CFM 10-Inch Pre-Wired Fan Top With Cable Entry

The C2T1923F10CEBK1 is a factory pre-wired fan top panel for rack cabinets, combining active exhaust cooling with overhead cable entry in a single panel. It is intended for IT, network, telecom, AV and broadcast teams who need to add airflow to a cabinet that is also being fed cables from above, without giving up either function.

A single 10.00 in (254 mm) fan is mounted behind a chrome-plated finger guard and delivers 550 CFM of free-flow air delivery at 60 dB. The fan is rated 115 VAC, 50/60 Hz, 0.29 A and ships wired to a 6 ft power cord, so the panel can be put into service by plugging it into a cabinet PDU or outlet. This version does not include a thermostat; the 4.70 in fan versions of the series are the ones offered with an adjustable thermostat. Alongside the 9.000 in (228.60 mm) fan opening, the panel carries covered access holes of 93.47 mm (3.680 in) diameter with grommets for cable routing.

Construction is 14-gauge mild steel with a painted steel top in RAL9005 black powder coat; the light gray equivalent is C2T1923F10CELG1. The panel measures 381.00 mm (15.000 in) by 508.00 mm (20.000 in) and ships at 6 lbs (2.72 kg).

Mounting hardware is supplied - six 8-32 x 1/2 in round-head screws and six speed nuts (CLPKIT832-6). U-clip nuts are installed on the cabinet frame, the panel is set in place, the screws are started loosely and then tightened with a Phillips screwdriver. C2T1923F10CEBK1 is sized for C2 cabinets 23.00 in wide x 23.63 in deep and C4 cabinets 24.00 in wide x 31.50 in deep, as well as all H1 and RCK cabinet sizes, with H1 requiring the H1TC Series for mounting. The fan assembly is cURus Recognized to UL507 and CSA C22.2 No. 113, and the part is TAA-compliant, RoHS and REACH compliant.