Hammond 27134PSLA 111x60x31 mm Slim Diecast Aluminium Enclosure

The 27134PSLA is a slim, elongated Eddystone die-cast box at 112 mm x 61 mm x 31 mm (4.4 in x 2.4 in x 1.22 in). With room for a P.C. board up to 103.12 mm x 52.02 mm and a shipping weight of only 0.3 lbs (0.14 kg), it suits narrow interface modules, line drivers and inline signal electronics.

Box and lid are die-cast from aluminium alloy to BS1490, LM2M, supplied in a natural finish. The material is tough yet easy to machine, so cut-outs and holes can be added to suit the design. A lap joint between lid and box provides protection against dust and splashing water, and the enclosure is rated IP54.

The ordering table specifies 4.41 in (112 mm) length, 2.40 in (61 mm) width, 1.22 in (31 mm) total depth and a 0.16 in (4 mm) lid. On the drawing the box is 111.75 mm [4.40 in] long, 60.55 mm [2.38 in] wide and 30.60 mm [1.20 in] high. It ships in shrink wrap.

The purchased assembly includes the lid, the box and 4 cover screws. The lid is retained by M3.5 x 12 countersunk screws with a POZIDRIV No. 2 head into countersunk lid holes, with a recommended torque of 50-55 cN.m [71-78 ozf.in]. Side walls have a low draft angle of 2° or less for easy PC board mounting. Replacement cover screws are available as SCR0230-100 (package of 100).

This is an Eddystone design; the Eddystone brand was, purchased by Hammond in 1998. The factory can modify 27134PSLA by milling, drilling or printing, and solid models are available in .stp or .x_t formats. It is RoHS and REACH compliant.