Hammond 1488HN9 12 x 24 in Sloped N12 Consolet Enclosure

The 1488HN9 is the widest of the 12 in cover-height consolets at 24 in, giving a 22.20 in x 10.20 in clear area on the door for a broad control layout on a relatively short, 10.90 in deep body. It is a Type 12 consolet from the 1488 Series, designed for use as an electric, hydraulic or pneumatic control and instrument enclosure, and it protects its contents from dirt, dust, oil and water.

The body is formed from 14 gauge steel with smooth, continuously welded seams. The cover is continuously hinged and can be removed by pulling the hinge pin; captive cover screws thread into sealed wells, and an oil resistant gasket and adhesive seal the opening. A bonding stud is provided on the door and a ground stud on the enclosure. Cover and enclosure are phosphatized and finished in ANSI 61 gray powder coating.

The 1488 ordering table lists this part at a cover height of 12.00 in (305 mm), a width of 24.00 in (610 mm) and a depth of 10.90 in (277 mm), with a front height (H1) of 2.50 in (64 mm) and a back height (H2) of 9.16 in (233 mm). Overall size is given as 12 in x 24 in x 9.16 in (305 mm x 610 mm x 233 mm). The part drawing shows a 24.34 in x 12.34 in door, a 23.50 in x 11.86 in door opening and 22.20 in x 10.20 in of clear space available on the door. Shipping weight is 26 lbs (11.79 kg).

The enclosure is ideal for flat or surface mounting, or on a pedestal, and its construction provides either a 30° or 60° slope on the front cover depending on mounting position. Pedestal and base, climate control and general accessories are listed for the series. The 1488HN9 is rated UL 508A Type 12, 13 and CSA Type 12, 13, and complies with NEMA Type 12, 13 and IEC 60529, IP54.