Hammond 1418CR6 16x20x6-Inch Clamped-Door Type 12 Wall Enclosure

Part 1418CR6 is a 16 x 20 x 6 in (406 mm x 508 mm x 152 mm) wall-mounted control enclosure from Hammond's 1418 Series, with a continuous hinge door held by stainless steel clamps. It is designed to house electrical, electronic, hydraulic or pneumatic controls and instruments, and provides a degree of protection from falling dirt, dust, oil and water.

Its body is wider than it is tall (20 in wide by 16 in high), suiting side-to-side control layouts, and the shallow 6 in depth gives a usable depth of 6.01 in on the manufacturer's drawing. The door opening is shown as 17.25 in wide by 13.22 in high, and the side view shows an overall height of 18.25 in. A removable 12 gauge inner panel measuring 13.00 in (330 mm) high by 17.00 in (432 mm) wide is included and mounts on collar studs; it is finished in white powder coating.

Construction is formed 14 gauge steel for both body and door, with smooth, continuously welded seams that have no knockouts, cutouts or holes, so you add only the entries your job needs. Oil resistant gaskets are permanently secured, a formed lip on door and enclosure helps keep out flowing liquids, and the continuous hinge door lifts off by pulling the hinge pin. The inside and outside are powder coated in recoatable smooth ANSI 61 gray, and the door has provision for a padlock.

Welded brackets provide for wall mounting, with 0.44 in diameter mounting holes shown on the drawing. A bonding stud is fitted on the door, a grounding stud in the enclosure, and a literature pocket on the inside of the door. The 1418 Series is rated UL 508A Type 12 and 13 and CSA Type 12 and 13, and complies with NEMA Type 12 and 13 and IEC 60529 IP54 (UL File E65324, CSA Cert. LR21001). The 1418CR6 ships in a box at 38 lbs (17.24 kg).

Note: the 1418 Series is being discontinued and replaced by the 1418LP Series; availability is limited to inventory on hand.