Hammond RP120GASKET 141 x 101 mm Replacement Lid Gasket 2-Pack

The RP120GASKET is a two-pack of replacement lid gaskets for RP Series enclosures with a 145 x 105 mm (5.71 x 4.13 in) footprint. Its size is listed as 141 x 101 x 3 mm (5.57 x 3.99 x 0.1 in), and the short description, RP120/RP121 GASKET- 2PK, names the two enclosure families it covers.

The series ordering table lists RP120GASKET in the Replacement Gasket (2-pk) column for the following bottom flange enclosures:

• RP1205BF / RP1205BFC (light gray ABS) and RP1200BF / RP1200BFC (off-white polycarbonate) - 145 mm x 105 mm x 40 mm
• RP1215BF / RP1215BFC (light gray ABS) and RP1210BF / RP1210BFC (off-white polycarbonate) - 145 mm x 105 mm x 60 mm

In the RP Series the lid uses two piece "tongue & groove" construction with a rubber gasket that protects against access of oil, dust and water; the enclosures are designed to meet IP65. The gasket is supplied with each enclosure and must be field installed. The part page lists the gasket size as 5.57 in x 3.99 in x 0.1 in (141 mm x 101 mm x 3 mm). The 40 mm and 60 mm tall versions of this size share the same gasket, covering eight bottom flange part numbers in light gray ABS and off-white polycarbonate, with opaque or clear lids.

The RP120GASKET is RoHS and REACH compliant, with UPC 623980524092 and UNSPSC 39121301. The inner panels listed for the same enclosures are STC121 (plastic) and STA121 (aluminum), and extra lid screws (SC619-50, M3.5-0.6 x 10mm) and PC board screws (SC622-50, M3 x 6mm) are sold in 50-packs.