Hammond RP117GASKET 162 x 82 mm Replacement Lid Gasket 2-Pack

The RP117GASKET is a two-pack of replacement lid gaskets for the long, narrow 165 x 85 mm (6.50 x 3.35 in) RP Series enclosures. The part page lists the gasket at 162 x 82 x 3 mm (6.36 x 3.21 x 0.1 in), and the short description, RP117/RP118/RP119 GASKET- 2PK, identifies the enclosure families it serves.

The series ordering table lists RP117GASKET in the Replacement Gasket (2-pk) column for the following bottom flange enclosures:

• RP1165BF / RP1165BFC (light gray ABS) and RP1160BF / RP1160BFC (off-white polycarbonate) - 165 mm x 85 mm x 40 mm
• RP1175BF / RP1175BFC (light gray ABS) and RP1170BF / RP1170BFC (off-white polycarbonate) - 165 mm x 85 mm x 55 mm
• RP1195BF / RP1195BFC (light gray ABS) and RP1190BF / RP1190BFC (off-white polycarbonate) - 165 mm x 85 mm x 70 mm
• RP1185BF / RP1185BFC (light gray ABS) and RP1180BF / RP1180BFC (off-white polycarbonate) - 165 mm x 85 mm x 85 mm

In the RP Series the lid uses two piece "tongue & groove" construction with a rubber gasket that protects against access of oil, dust and water; the enclosures are designed to meet IP65. The gasket is supplied with each enclosure and must be field installed. The part page lists the gasket size as 6.36 in x 3.21 in x 0.1 in (162 mm x 82 mm x 3 mm). Four enclosure heights (40, 55, 70 and 85 mm) share this lid footprint, so this is the single replacement gasket for sixteen bottom flange part numbers in ABS and polycarbonate.

The RP117GASKET is RoHS and REACH compliant, with UPC 623980524108 and UNSPSC 39121301. The inner panels listed for the same enclosures are STC117 (plastic) and STA117 (aluminum), and extra lid screws (SC619-50, M3.5-0.6 x 10mm) and PC board screws (SC622-50, M3 x 6mm) are sold in 50-packs.