Hammond RP113GASKET 122 x 82 mm Replacement Lid Gasket 2-Pack

The RP113GASKET is a two-pack of replacement lid gaskets sized 122 x 82 x 3 mm (4.79 x 3.22 x 0.1 in) per the part page. It serves the 125 x 85 mm (4.92 x 3.35 in) RP Series enclosures, and its short description, RP112/113/114/115 GASKET- 2PK, reflects the four enclosure heights built on that lid.

The series ordering table lists RP113GASKET in the Replacement Gasket (2-pk) column for the following bottom flange enclosures:

• RP1125BF / RP1125BFC (light gray ABS) and RP1120BF / RP1120BFC (off-white polycarbonate) - 125 mm x 85 mm x 40 mm
• RP1135BF / RP1135BFC (light gray ABS) and RP1130BF / RP1130BFC (off-white polycarbonate) - 125 mm x 85 mm x 55 mm
• RP1145BF / RP1145BFC (light gray ABS) and RP1140BF / RP1140BFC (off-white polycarbonate) - 125 mm x 85 mm x 70 mm
• RP1155BF / RP1155BFC (light gray ABS) and RP1150BF / RP1150BFC (off-white polycarbonate) - 125 mm x 85 mm x 85 mm

In the RP Series the lid uses two piece "tongue & groove" construction with a rubber gasket that protects against access of oil, dust and water; the enclosures are designed to meet IP65. The gasket is supplied with each enclosure and must be field installed. The part page lists the gasket size as 4.79 in x 3.22 in x 0.1 in (122 mm x 82 mm x 3 mm). With four heights sharing one lid footprint (40, 55, 70 and 85 mm), this single gasket covers sixteen bottom flange enclosure part numbers, which keeps spares stock simple for maintenance teams and OEMs.

The RP113GASKET is RoHS and REACH compliant, with UPC 623980524085 and UNSPSC 39121301. The inner panels listed for the same enclosures are STC113 (plastic) and STA113 (aluminum), and extra lid screws (SC619-50, M3.5-0.6 x 10mm) and PC board screws (SC622-50, M3 x 6mm) are sold in 50-packs.