Hammond RP1020BFC 65x60x40mm Clear Lid Polycarbonate Flanged Enclosure

The RP1020BFC is a water-tight polycarbonate enclosure with an integral bottom flange and a clear lid, sized 65 x 60 x 40 mm (2.56 in x 2.36 in x 1.57 in). It is aimed at OEM engineers, electronics builders and electricians who need a gasketed housing for printed circuit boards or components that bolts flat to a panel, wall or chassis through its flange. The clear lid leaves the board and components inside visible while the lid stays closed.

The body is polycarbonate with a flame rating of UL94 V-2, compared with the UL94-HB general-purpose ABS versions in the same series. The part page lists the colour as Light Gray; the series ordering table lists this part under Off-White Polycarbonate. A two-piece tongue-and-groove lid with a rubber gasket (included, field installed) guards against oil, dust and water, and the design is rated IP65. Self-captivating M3.5 stainless steel lid screws (included) thread into corrosion-resistant bushings for repeated assembly and disassembly.

The drawing gives inside dimensions of 59.16 mm [2.33 in] long, 54.16 mm [2.13 in] wide and 35.00 mm [1.38 in] high, and 89.95 mm [3.54 in] overall length across the flange, which carries 4.20 mm [0.17 in] mounting holes. The part page lists a maximum PC board size of 56 x 51 mm, and the internal board posts accept M3 self-tapping screws. This size is the shortest length in the series ordering table, offered in a single 40 mm height.

Matching accessories listed for the RP1020BFC include plastic inner panel STC102, aluminum inner panel STA102 and replacement gasket two-pack RP102GASKET. Spare lid screws (SC619-50) and PC board screws (SC622-50) come in 50-packs. It is RoHS and REACH compliant, packed in a bag at a shipping weight of 0.13 lbs (0.06 kg).