Hammond PJU1086CCF 10x8x6 In Clear Screw Cover Type 4X Box, Flange

The PJU1086CCF is a 10 x 8 x 6 in nominal Type 4X polyester junction box from the PJU Series with a clear polycarbonate lift-off cover held by captive 316 stainless steel screws. Typical uses listed for the series are instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes and terminal wiring enclosures, particularly where equipment is hosed down, very wet, hot or exposed to corrosive environments.

The box is compression molded fiberglass reinforced polyester in a gray finish and the clear cover is injected polycarbonate. The fiberglass polyester is easily punched, cut or drilled, carries enhanced UV inhibitors for outdoor weathering, and rates an impact index of 6.78 J (5 ft/lb). It seals with a formed-in-place polyurethane gasket; the cover is fastened by captive screws threaded into four #10-32 brass inserts.

Enclosure dimensions are 10.05 in H x 8.27 in W x 6.13 in D (255 mm x 210 mm x 156 mm). With its two glued polycarbonate mounting flanges fitted, the drawing shows an overall height of 11.50 in. Threaded brass inserts accept the optional 14R0907 inner panel, which measures 8.75 in x 6.88 in and is offered in white powder coated steel, unfinished aluminum or fiberglass.

The PJU1086CCF mounts through (4) 0.34 in (8.65 mm) holes in its polycarbonate flanges, spaced 10.75 in vertically per the drawing. Mounting hardware is included. The series is listed to UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 and cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94, and complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529 IP66. It operates from -40°C to 130°C (-40°F to 266°F) and is RoHS and REACH compliant.