Hammond PJHMI1614H 16x14 Opaque Gray HMI Hinged Cover Kit, Screw Closure

The PJHMI1614H is a light gray opaque polycarbonate HMI hinged cover kit with a screw closure, part of the PJHMI Series. It mounts over an opening in an enclosure wall to protect instruments or electronics requiring routine attention or detail. The cover is light gray solid opaque polycarbonate, concealing the device behind it when closed. Its hinged screw cover swings open for service and screws closed.

The frame measures 15.87 in (403 mm) high by 14.07 in (357 mm) wide by 2.20 in (56 mm) deep (nominal size 16 in x 14 in x 2 in (406 mm x 356 mm x 51 mm)), and the viewing area is 14.49 in (368 mm) by 12.71 in (323 mm). Maximum panel cutout is 14.49 x 12.71 in, and it will fit enclosure sizes 18x16 and larger. Shipping weight is 4.5 lbs (2.04 kg).

The box is injection polycarbonate and the cover is injection polycarbonate, hung on a 316 stainless steel hinge pin and sealed by a Formed-In-Place (FIP) polyurethane gasket in a continuous channel. The cover is secured by two #10-32 brass inserts with 316 stainless steel captive cover screws and O-rings. It is UV stabilized for outdoor use, with a service temperature of -31°F (-35°C) to 266°F (130°C).

To install, mark and drill the mounting holes at 7/32 or #2 (.220 dia) (hole pattern HMI164), cut the opening, clean the surface and gasket, and mount with the supplied hardware torqued to 15 - 20 in-lbs using a Phillips screwdriver or similar tool. The hardware suits surfaces .059" to .250" thick. One hardware kit is included (10 fasteners needed), each kit with ten 10-32 x 1 pan head screws, ten stainless steel washer rivets and ten 10-32 nylon-insert nuts.

The PJHMI1614H is a listed UL component (UL File E487574) for use with enclosures rated Types 1, 3, 3R, 4, 4X, 12 or 13, and is CSA listed Type 1, 3, 3R, 4, 4X, 12 or 13. It is RoHS and REACH compliant. Optional prop arm: PJHMIPROP1614; the clear version of this kit is PJHMI1614CCH.