Hammond PJHMI1412CCL 14x12 Clear HMI Hinged Cover, Lockable Snap Latch

The PJHMI1412CCL is a clear polycarbonate HMI hinged cover kit with a snap latch closure, part of the PJHMI Series. It mounts over an opening in an enclosure wall to protect instruments or electronics requiring routine attention or detail. Because the cover is clear polycarbonate thermoplastic, the display behind it stays visible while the cover is closed. Its latch has a padlock feature to prevent unintentional opening.

The frame measures 13.85 in (352 mm) high by 12.07 in (307 mm) wide by 2.20 in (56 mm) deep (nominal size 14 in x 12 in x 2 in (356 mm x 305 mm x 51 mm)), and the viewing area is 12.49 in (317 mm) by 10.71 in (272 mm). Maximum panel cutout is 12.49 x 10.71 in, and it will fit enclosure sizes 16x14 and larger. Shipping weight is 4 lbs (1.81 kg).

The box is injection polycarbonate and the cover is injected polycarbonate, hung on a 316 stainless steel hinge pin and sealed by a Formed-In-Place (FIP) polyurethane gasket in a continuous channel. The closure is two 316 stainless steel lockable snap latches; a replacement snap latch is available as part number PCJLLRSH. It is UV stabilized for outdoor use, with a service temperature of -31°F (-35°C) to 266°F (130°C).

To install, mark and drill the mounting holes at 7/32 or #2 (.220 dia) (hole pattern HMI120), cut the opening, clean the surface and gasket, and mount with the supplied hardware torqued to 15 - 20 in-lbs using a Phillips screwdriver or similar tool. The hardware suits surfaces .059" to .250" thick. One hardware kit is included (10 fasteners needed), each kit with ten 10-32 x 1 pan head screws, ten stainless steel washer rivets and ten 10-32 nylon-insert nuts.

The PJHMI1412CCL is a listed UL component (UL File E487574) for use with enclosures rated Types 1, 3, 3R, 4, 4X, 12 or 13, and is CSA listed Type 1, 3, 3R, 4, 4X, 12 or 13. It is RoHS and REACH compliant. Optional prop arm: PJHMIPROP1412; the opaque version of this kit is PJHMI1412L.