Hammond HME20106 2000x1000x600mm Type 12 Modular Freestanding Enclosure

The HME20106 is a single-door Type 12 modular freestanding enclosure measuring 2000 mm high, 1000 mm wide and 600 mm deep. It gives control panel builders and electrical contractors a rugged housing for industrial control and operator interface equipment, with a mid-range 600 mm depth that balances component clearance against floor footprint.

Construction is formed 14 gauge steel on a fully welded frame with a 25 mm hole pattern for component and accessory mounting flexibility. A foam gasket on all openings provides a dust-tight seal, and the enclosure complies with NEMA Type 12 and IEC 60529 IP54, with UL 508A Type 12 and CSA Type 12 listed as series standards. The exterior is phosphatized and finished in RAL 7035 light gray textured powder coating, while the inner mounting panel is unpainted galvanized 12 gauge steel.

Nominal size is 78.74 x 39.37 x 23.62 in (2000 x 1000 x 600 mm). The inner panel measures 74.65 in (1896 mm) high by 35.39 in (899 mm) wide, and the drawing shows a 712 mm x 306 mm gland plate cut-out in the bottom. Shipping weight is 385 lbs (174.63 kg) on a skid.

Each unit is configured with the frame, a removable solid top panel, four lifting eyebolts, a removable bottom panel with gland plates, a solid front door with door frame, a removable rear cover panel and the inner mounting panel. The door opens 135° and doors can be interchanged, removed or reversed. Bonding and grounding studs are provided for all doors and panels. Frames join to neighbouring units with an optional joining kit for large-scale and mixed-use line-ups, and formed 14 gauge steel side panels are sold separately in pairs.