Hammond DINM22COVER Front Clear Polycarbonate Cover, Slim Control Box

The DINM22COVER is the front clear cover for the 1597DINM22GY slim DIN rail control box. The 1597DINM22GY drawing marks the front clear cover as not included with the enclosure, and the series ordering table lists DINM22COVER as the clear cover option for that control box. It is for panel builders and OEMs who want to see LEDs, labels or displays on the board inside while keeping the front of the unit covered.

The cover measures 3.3 in x 0.88 in x 0.37 in (84 mm x 22 mm x 9 mm) and has a listed shipping weight of 0.01 lbs (0.00 kg). The 1597DINM22GY drawing describes it as a front clear cover made of polycarbonate.

The matching 1597DINM22GY control box is 90 mm high, 22.5 mm wide and 118 mm deep, mounts on standard symmetrical 35 mm DIN rail, and comes with base, cover, front panel and 2 side panels. It takes a 104 x 77 x 1.5 mm PCB on snap-in clips and assembles with snap closures, no hardware required. The other covers in the DIN rail enclosure series (closed, oval, vented and knockout) are for the modular enclosures, not this control box.

DINM22COVER is REACH and RoHS compliant and carries UPC 623980003207. Because polycarbonate can be affected by some chemicals, the manufacturer advises against acetone, ketones, ethers, aromatic and chlorinated hydrocarbons, thread locking compounds and strong solvents; clean it only with products listed as plastic safe.