Hammond CN4ST4404 400A 4-Wire 48 in Type 4/3R Splitter Trough

The CN4ST4404 is a Type 4/3R mild steel splitter trough from the CN4ST Series, built for four-wire (4 wire) service and a 400 A rating for both copper and aluminum conductors. It is intended for electricians, panel builders and facilities teams who need to split a feeder into multiple taps inside a gasketed, hinged enclosure. The series is designed for distribution of up to 600 A (max) service at 600V max using either 3 or 4 wires, and 75° C conductor ampacity is permitted. If you need the 3-wire version of this same size, the ordering table pairs it with CN4ST4403.

The enclosure measures 48.00 in (1219 mm) high, 10.00 in (254 mm) wide and 6.00 in (152 mm) deep per the series ordering table, and is formed and spot welded from 14 gauge steel (the series uses 16 gauge, moving to 14 gauge when width is 8" or more). Seams are continuously welded and ground smooth, a formed lip helps exclude flowing liquids and contaminants, and a seamless poured-in-place gasket seals the door. Splitter blocks are factory installed; this size references splitter block CSBL400.

The hinged door uses quarter turn slot latches that require a tool to open, and doors can be removed for modifications and are interchangeable. Hinges are 304 stainless steel with stainless steel hinge pins. An inner panel finished in white powder coating is included and mounts on collar studs, while the cover and enclosure carry a recoatable smooth ANSI 61 gray powder coat. A hardware kit with panel mounting nuts and sealing washers for the wall mounting holes is included.

The CN4ST Series is CSA Certified Type 3R, 12, 4 and complies with IEC 60529, IP66. The manufacturer's part page lists no shipping weight or UPC for the CN4ST4404; dimensions here come from the ordering table and drawing. For equipment grounding, the optional grounding kit for this size is CGK400.