Hammond 369JXP 50 VA 500V C.T. Potted Plate & Filament Transformer

The 369JXP is a 50 VA potted high voltage (plate) and filament power transformer from the 300P Series, built for designers and builders of equipment that need a plate supply and heater windings from one universal-primary transformer. Compared with the other 50 VA model in the series, it trades a little current for voltage: a 500V C.T. plate winding at 69 mA, plus one 6.3V C.T. filament winding at 2.5 A.

The transformer is enclosed in a drawn steel case and completely potted in epoxy, finished in black powder paint to match the 1650P series of potted output transformers. Windings are concentric wound for low stray field and low noise, and a Faraday copper primary shield reduces capacitive coupling from the primary, attenuating higher frequency current coupling to the secondaries; the shield is internally grounded to the end bell.

The primary accepts 100, 110, 120, 200, 220, 230 or 240 VAC at 50/60 Hz. The 500V C.T. high voltage secondary is rated 69 mA and includes a 50 VAC bias tap (measured with the high voltage C.T. grounded), and the unit also provides a single 6.3V C.T. @ 2.5A filament winding. It can be run full wave bridge or full wave C.T. The series is hipot tested at 2,000 VAC and is c UL us recognized (E207860).

Listed dimensions are A 3.31 in (84 mm), B 3.88 in (99 mm) and C 4.25 in (108 mm). The 369JXP mounts using 1/4-20 threaded inserts, mounting hardware is included, and the shipping weight is 2.5 lbs (1.13 kg).