Hammond 183K10-BULK 56VA 10V C.T. PCB Transformer, Bulk Pack

The 183K10-BULK is the bulk-pack part number for the 183K10, a 56VA low voltage power transformer from the 183 Series built for printed circuit board mounting. It suits OEM engineers and electronics builders who need a compact, board-mounted source of low AC voltage from either 115 or 230 VAC mains at 50/60 Hz.

Output is taken from dual secondary windings that are non-concentrically wound and can be wired in series, in parallel or used separately. Wired in series, the 183K10-BULK delivers 10V C.T. @ 5.6A; with the windings in parallel it delivers 5V @ 11.2A (RMS). When the secondaries are connected in series (pin 9 connected to pin 10), that connection acts as the center tap.

Construction uses a low profile, split bobbin with top shroud design. Primary to secondary coupling is low, so no electrostatic shield is required, insulation is hipot tested to 4,000V RMS and rated Class F (155 degrees C). Per the series specification sheet, the 56VA size measures 3.00 x 2.50 x 1.81 in (L x W x H), uses 0.045 in square pins and weighs 1.7 lbs; the listed shipping weight for this bulk part number is 1.6 lbs (0.73 kg).

Mounting is four-hole using #6 screws (mounting screws not provided), and the pins follow industry standard spacing for P.C. board layouts. For 115V operation the primary windings are connected in parallel; for 230V operation they are connected in series. The 183 Series is cUL listed, and this part number is RoHS and REACH compliant.