Hammond 1650P 60W Push-Pull Tube Output Transformer, 6.6K CT
Ships from and sold by A5 IT
Exclusive pricing and Net-30 terms. Sign in or create a free account.
Create Free Business AccountKey Features
- 60 W RMS audio, 6,600 ohm CT primary, 200 mA DC per side
- Secondary impedance 4/8/16 ohms
- Push-Pull (2 Tubes); suggested tubes 6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88
- Frequency response 30 Hz to 30 kHz at full rated power, +/- 2 db max
- Enclosed (shielded), 4 slot, above chassis Type "X" mounting
- Insulated flexible leads, 8 in minimum; plastic coil forms
- Dielectric strength 2000Vrms; -40 to 105C temperature range
- Made in Canada; REACH and RoHS compliant
The 1650P is a 60 W push-pull tube output transformer with a 6,600 ohm centre-tapped primary, 200 mA DC per side and 4, 8 and 16 ohm secondaries. Unlike the 1650N at the same power, it is listed for a single push-pull pair (2 tubes), with suggested types 6L6GC, 807, 5881, EL34, 6146B, 6550B and KT88.
Construction follows the classic series design: the transformer is enclosed (shielded), with 4 slot, above chassis Type "X" mounting, plastic coil forms for coil support and insulation, and insulated flexible leads (8 in minimum per the part drawing). Frequency response is 30 Hz to 30 kHz at full rated power, +/- 2 db max (ref. 1 kHz) minimum per the part drawing. Because of the unique interleaving of the windings, both secondary windings must be engaged to meet specifications.
Dimensions from the series table are A 3.13 in (80 mm), B 4.25 in (108 mm), C 3.81 in (97 mm), D 2.50 in (64 mm) and E 2.94 in (75 mm), with 0.20 x 0.38 in mounting slots. Typical electrical data from the drawing includes a primary inductance of 305H / 145KOhm, leakage inductance of 11.8mH, a dielectric strength of 2000Vrms and a temperature range of -40 to 105C. Shipping weight is 8 lbs (3.63 kg).
The 1650P label is marked Made in Canada, and the part is REACH and RoHS compliant. The manufacturer notes that tube operating conditions change the optimum plate-to-plate load, so consult a tube manual or data sheet before choosing an output transformer.
Ideal For
- Push-pull tube hi-fi amplifiers
- Guitar amplifier output stages
- Triode, ultra-linear pentode and tetrode output
Overview
| Series | 1608-1650 Series - Tube Output Transformer, Push-Pull Audio (10-280 W) |
| Product Type | Output transformer, push-pull (classic tube type, ultra-linear) |
| Short Description | AUDIO TX 6.6K OHM 60 WATT |
Dimensions
| Dimension A | 3.13 in (80 mm) |
| Dimension B | 4.25 in (108 mm) |
| Dimension C | 3.81 in (97 mm) |
| Dimension D | 2.50 in (64 mm) |
| Mounting Slot G | 0.20 in (5 mm) x 0.38 in (10 mm) |
| Drawing Dimensions | 3.125 ±0.063, 2.500 ±0.063, 3.813 ±0.063, 4.250 ±0.125, 2.940 ±0.063 in |
| Weight (Spec Table) | 8 lbs |
| Dimension E (+/- 1/16") | 2.94 in (75 mm) |
| Mounting Slot (Drawing) | Ø0.203 x 0.375 in |
Electrical
| Operation | Push-Pull (2 Tubes) |
| Test Conditions | All graphs input level 27dBu @ 1.0 kHz reference; results typical, subject to normal manufacturing and electrical tolerances |
| Audio Watts (RMS) | 60 |
| Frequency Response | 30 Hz to 30 kHz at full rated power (+/- 2 db max - ref. 1 kHz) minimum per part drawing; series sheet states +/- 1 db |
| Dielectric Strength | 2000Vrms |
| Maximum DC Per Side | 200 ma. |
| Suggested Tube Types | 6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88 |
| DCR Primary Blue-Brown | 160.5 Ohms |
| Measurement Instruments | dScope Series III Audio Analyzer; Wayne Kerr 3255B with 3265B Inductance Analyzer; HP 4192a LF Impedance Analyzer; Keithley 2010 DVM |
| Primary Impedance (Ohms) | 6,600 ct |
| DCR Secondary Black-Green | 0.230 Ohm |
| Secondary Connection Note | Both secondary windings must be engaged to meet specifications (unique interleaving of the windings) |
| Secondary Impedance (Ohms) | 4-8-16 |
| DCR Secondary Black/Yel-Yel | 0.370 Ohm |
| Output Power (Typical, Drawing) | 60 Watts |
| Input Impedance (Typical, Drawing) | 6600 Ohms |
| Leakage Inductance @ 60Hz, 10.0V SC | 11.8mH (Primary Brown-Red) |
| Output Impedance (Typical, Drawing) | 4, 8 & 16 Ohms |
| Inductance | Impedance @ 60Hz, 10.0V OC | 305H | 145KOhm (Primary Brown-Red) |
Identifiers
| UPC | 623980301815 |
| UNSPSC | 39121301 |
| Part Number | 1650P |
Packaging & Shipping
| Shipping Weight | 8 lbs (3.63 kg) |
Construction & Finish
| Leads | Insulated flexible leads, 8" min. (part drawing) |
| Mounting | 4 slot, above chassis Type "X" mounting |
| Enclosure | Enclosed (shielded) |
| Coil Forms | Plastic coil forms for coil support and insulation |
Environmental & Protection
| Temperature Range | -40 To 105C |
Compliance & Certifications
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Purchasing this for your business?
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
Frequently Asked Questions
What are the primary and secondary impedances of the 1650P?▾
The primary is 6,600 ct ohms and the secondary offers 4-8-16 ohm taps.
Which tubes is it suggested for?▾
Suggested tube types are 6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88, in Push-Pull (2 Tubes) operation. The manufacturer advises consulting a tube manual or data sheet first, since operating conditions change the optimum plate-to-plate load.
Do I need to connect both secondary windings?▾
Yes. Due to the unique interleaving of the windings, both secondary windings must be engaged to meet specifications; see the hook-up diagrams.
How is the 1650P mounted?▾
It is enclosed with 4 slot, above chassis Type "X" mounting; the drawing shows Ø0.203 x 0.375 in slots.
What frequency response does the 1650P drawing specify?▾
The part drawing states 30 Hz to 30 kHz at full rated power, +/- 2 dB max (ref. 1 kHz) minimum, while the series sheet states +/- 1 dB.
Related Products
Save 52%1650N — Output transformer, push-pull, 60W , primary 4,300 ct, 318 ma., secondary 4-8-16
Hammond Manufacturing · 1650N
Save 52%1650R — Output transformer, push-pull, 100W , primary 5,000 ct, 318 ma., secondary 4-8-16
Hammond Manufacturing · 1650R
Save 52%1650M — Output transformer, push-pull, 60W , primary 1,400CT/800CT, 318 ma., secondary 4-8-16
Hammond Manufacturing · 1650M
Save 52%1650T — Output transformer, push-pull, 120W , primary 1,900 ct, 403 ma., secondary 4-8-16
Hammond Manufacturing · 1650T
Save 52%1650K — Output transformer, push-pull, 50W , primary 3,400 ct, 318 ma., secondary 4-8-16
Hammond Manufacturing · 1650K