Hammond 162G16 12VA 16V Center-Tapped PCB Transformer, 115/230V

The 162G16 is a low-profile, PC board mount power transformer from the 162-164 Series, rated at 12 VA with a universal dual primary for 115V or 230V operation at 50/60 Hz. It is intended for designers and OEM engineers who need a low-voltage AC source mounted directly on a printed circuit board. The 16V center-tapped series connection delivers .8A, and wiring the two secondaries in parallel gives 8V at 1.6A.

Construction uses a low profile, split bobbin design with dual winding secondaries that are non-concentrically wound. Primary to secondary coupling is low, so no electrostatic shield is required. Insulation is Class B (130 degrees C) and the unit is hipot rated at 2,500V RMS; the drawing lists a primary-to-secondary hipot test of 2500V, 60Hz for 1 second. Pin numbers are embossed on the bobbin flange. The units are designed so that all windings must be used.

Per the part drawing, the 162G16 measures 1.875" long, 1.563" wide and 1.410" high (inches, ±0.030"), with a series table nominal size of 1.88 x 1.56 x 1.50 in. The series table lists a weight of 0.7 lbs, and the listed shipping weight is 0.7 lbs (0.32 kg). At the 12 VA size the transformer uses two-hole mounting with #4 mounting screws (screws are not provided), in addition to PC board pins on industry standard pin spacing.

Electrically, the drawing shows two 115V primary windings (pins 1-2 and 3-4) and two 8V secondary windings (pins 5-6 and 7-8) marked 800mA each. Test criteria include a maximum excitation current of 70.8mA at 115V, 60Hz, and a secondary no-load voltage of 9.714V ±2% per winding. The part is cULus recognized and is listed as RoHS and REACH compliant. A single-primary 115V version of the same rating is available as the 164G16.