Hammond 1590Z135GY 175x80x60mm Gray RAL 7001 Diecast Aluminum Enclosure

The 1590Z135GY is a thick-wall, watertight diecast aluminum enclosure from the 1590Z Type 4X/ 6P series, powder painted in smooth gray RAL 7001. A long, narrow sealed box with extra depth over the 52 mm deep 1590Z130 of the same footprint, for taller components on elongated boards, it suits OEM engineers, electricians and integrators.

It is 6.89 in (175 mm) long, 3.15 in (80 mm) wide and 2.36 in (60 mm) in total depth, with a 0.79 in (20 mm) lid, giving 53.00 mm [2.09 in] of inside depth over a 165.76 mm [6.53 in] by 70.76 mm [2.79 in] inside footprint. Average wall thickness is 4.00 mm [.16 in]. Shipping weight is 1.4 lbs (0.64 kg).

Construction is two-piece tongue and groove with a replaceable one-piece silicone rubber gasket, rated -40C to +150C (-40F to 302F), that is supplied loose inside the enclosure rather than pre-installed. Four recessed stainless steel M4 - 0.7 machine screws close the lid at a recommended torque of 6.6-8.8 lbf.in (75-100 cN.m). The purchased assembly includes the box, lid, silicone gasket, 4 cover screws and 3 ground screws with washers. The lid screws are self-captivating and create threads on first installation, and the design is intended for repetitive opening and closing.

For installation, blind through-holes located outside the gasket protection allow easy wall mounting. There is no internal mounting shelf and no inner panel listed for this size. Spares are SC574-30 lid screws (30 pack, M4 - 0.7 x 30mm), SCGM4-50 copper ground hardware and the 1590Z130G gasket two-pack, shared with the 1590Z130.

The series is cUL and UL listed (file E65324), independently tested to IP66, IP67 and IP68 and to NEMA Type 4, 4X, 6, 6P, 12 and 13, and carries an IK08 impact rating per IEC62262. Customers should confirm suitability for their application by their own testing. This gray version (RAL7001 Gloss on the drawing) is powder painted inside and out; the same size is also offered in natural and textured black.