Hammond 1550Z107GASKET 121x76mm Silicone Replacement Lid Gasket, 2-Pack

The 1550Z107GASKET is a two-pack of pre-formed silicone replacement gaskets for the Hammond 1550Z watertight diecast enclosures sharing the nominal 125 x 80 mm footprint: the 41 mm-deep 1550Z107 and 59 mm-deep 1550Z108, in either natural or black finish. Because both depths use the same lid, one gasket part number covers all four enclosures, which makes it a practical spare for maintenance teams and OEM production lines.

Each gasket is a pre-formed, one-piece silicone rubber seal that installs easily into the lid groove of the enclosure. The part page lists the size as 4.78 in x 3.01 in x 0.09 in (121 mm x 76 mm x 2 mm); the drawing shows an overall outline of 121.40 mm [4.78 in] by 76.40 mm [3.01 in], with a profile of 2.30 mm [.09 in] and 2.60 mm [.10 in] shown in the section detail.

The 1550Z series gasket has a temperature rating of -40°C to +150°C (-40°F to 302°F). The manufacturer describes this kit as a replacement gasket kit with IP66 protection, while the part page lists an IP68 rating; the complete 1550Z enclosures are independently tested to meet IP66, IP67 and IP68 as well as NEMA Type 4, 4X, 12 and 13. Customers should conduct their own testing to determine suitability for any specific application.

The 1550Z107GASKET is RoHS and REACH compliant, ships in a bag, and has a listed shipping weight of 0.01 lbs (0.00 kg). Because the lid screws on 1550Z enclosures sit outside the gasket protection area, the seal works without o-rings around the screws. Compatible enclosures listed in the manufacturer ordering table are 1550Z107, 1550Z107BK, 1550Z108 and 1550Z108BK.