(224) 955-1644
Hammond ManufacturingAuthorized partner store
149F open frame PC board mount audio transformer, driver, 450 to 40/160 ohms

Hammond 149F 450:40/160 Ohm Driver Transformer, 200 mW PCB Mount

Hammond Manufacturing|

MPN: 149F

|

UPC: 623980199207

Available on Backorder
$18.08

Ships from and sold by A5 IT

Available on backorder — ships as soon as stock arrives

Ground Shipping · $16.89Ships as soon as stock arrives. We'll confirm the lead time before your card is charged.
New, with full manufacturer warranty
Business Pricing Available

Exclusive pricing and Net-30 terms. Sign in or create a free account.

Create Free Business Account

Key Features

  • 450 ohm primary to 40/160 ohm secondary driver transformer
  • 200 mW output with 33 mA maximum primary D.C. current
  • D.C. resistance 52 ohms primary / 19 ohms secondary (+/- 15%)
  • Clinching lugs for extra mounting strength on the P.C. board
  • 200 Hz - 15 kHz (+/- 1 dB); approx. 2% distortion at 200 Hz
  • 0.025" square pins on 0.2" grid; 250V rms insulation test; RoHS/REACH

The 149F is a PC board mount driver transformer with a 450 ohm primary and a 40/160 ohm secondary. It sits between the 149E and 149G in the series and gives engineers a mid-range driver ratio for audio stages that feed low impedance loads on a compact board layout.

The 149 Series uses an economical, open type, horizontal bracket construction with pin-type terminals for P.C. board mounting, and adds clinching lugs for extra mounting strength. Windings are bifilar wound for balanced capacitive and resistance characteristics on pin bobbins spaced for a standard 0.2" grid, and the series is insulation tested at 250V rms.

The 149F is rated for 200 mW output with a maximum primary D.C. current of 33 mA. D.C. resistance is 52 ohms on the primary and 19 ohms on the secondary (+/- 15%). Frequency response is 200 Hz to 15 kHz (+/- 1 dB, referenced at 1 kHz) and insertion loss is less than 1/2 dB, while total distortion is approximately 2% at 200 Hz for drivers, decreasing at higher frequencies. The split secondary gives a choice of 40 or 160 ohms, wired per schematic figure 2.

Net weight is 1.0 oz. and the listed shipping weight is 0.05 lbs (0.02 kg). The 149F is RoHS and REACH compliant, UPC 623980199207.

Ideal For

  • Audio driver transformer for PC boards
  • 450 to 40/160 ohm matching
  • Low-level audio interstage coupling

Mounting

Pins0.25" length & 0.025" square
Pin SpacingStandard 0.2" grid
Mounting TypeP.C. board mount, pin type
Schematic Drawing Figure2

Overview

Series149 Series (Audio Open Frame)
ApplicationDriver
Product TypeAudio transformer, open frame PC board mount
Short DescriptionAUDIO TX DRIVER PC MOUNT

Dimensions

Net Weight1.0 oz.

Electrical

Output200 mW
Insertion LossLess than 1/2 dB
Insulation Test250V rms
Total DistortionApproximately 2% at 200 Hz (drivers), decreasing at higher frequencies
Frequency Response200 Hz - 15 kHz (+/- 1 dB, ref. @ 1 kHz)
Max. Primary DC Current33 mA
Primary Nominal Impedance450 ohms
Secondary Nominal Impedance40/160 ohms
Primary DC Resistance (+/- 15%)52 ohms
Secondary DC Resistance (+/- 15%)19 ohms

Identifiers

UPC623980199207
UNSPSC39121301

Packaging & Shipping

Shipping Weight0.05 lbs (0.02 kg)

Construction & Finish

WindingBifilar wound for balanced capacitive and resistance characteristics, on pin bobbins
ConstructionEconomical, open type, horizontal bracket construction
Clinching LugsIncluded for extra mounting strength

Compliance & Certifications

RoHS CompliantYes
REACH CompliantYes

Purchasing this for your business?

Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.

Wholesale pricing below retail
Net-30 terms for qualified businesses
Volume discount tiers
Dedicated account representative
Saved payment methods & PO support
Priority order processing
Create Free Business Account

Frequently Asked Questions

What impedances does the 149F offer?▾

A 450 ohm nominal primary and a 40/160 ohm nominal secondary.

What is the maximum primary D.C. current for the 149F?▾

33 mA.

What output power is the 149F rated for?▾

200 milliwatts.

How is the 149F mounted?▾

It is a pin-type P.C. board mount transformer with 0.025" square pins on bobbins spaced for a standard 0.2" grid. The 149 Series also includes clinching lugs for extra mounting strength.

Is the 149F RoHS and REACH compliant?▾

Yes. The part is listed as both RoHS compliant and REACH compliant.