Hammond 1488LL13 Square 20-Inch Type 12 Sloped Consolet

The 1488LL13 is the square size in the tallest, 20 in cover-height group. It has the deepest body in the series at 17.83 in and an 18.20 in x 18.20 in clear area on the door for tall device layouts or larger instruments. It is a Type 12 consolet from the 1488 Series, designed for use as an electric, hydraulic or pneumatic control and instrument enclosure, and it protects its contents from dirt, dust, oil and water.

The body is formed from 14 gauge steel with smooth, continuously welded seams. The cover is continuously hinged and can be removed by pulling the hinge pin; captive cover screws thread into sealed wells, and an oil resistant gasket and adhesive seal the opening. A bonding stud is provided on the door and a ground stud on the enclosure. Cover and enclosure are phosphatized and finished in ANSI 61 gray powder coating.

The 1488 ordering table lists this part at a cover height of 20.00 in (508 mm), a width of 20.00 in (508 mm) and a depth of 17.83 in (453 mm), with a front height (H1) of 2.50 in (64 mm) and a back height (H2) of 13.16 in (334 mm). Overall size is given as 20 in x 20 in x 13.16 in (508 mm x 508 mm x 334 mm). The part drawing shows a 20.34 in x 20.34 in door, a 18.63 in x 19.87 in door opening and 18.20 in x 18.20 in of clear space available on the door. Shipping weight is 37 lbs (16.78 kg).

The enclosure is ideal for flat or surface mounting, or on a pedestal, and its construction provides either a 30° or 60° slope on the front cover depending on mounting position. Pedestal and base, climate control and general accessories are listed for the series. The 1488LL13 is rated UL 508A Type 12, 13 and CSA Type 12, 13, and complies with NEMA Type 12, 13 and IEC 60529, IP54.