Hammond 1427M3 5.25 in Chrome Bar Handle, 1/4-20 Threaded Studs

The 1427M3 is a 5.25 in round bar handle with external 1/4-20 threaded studs, bright chrome plated, with 5.25 in (133 mm) mounting hole centres. It belongs to the 1427 chassis handle series, round steel pulls for chassis, panels and drawers, and suits OEM engineers, panel builders and technicians fitting a handle to their own equipment. Instead of screws into tapped ends, it passes its studs through the panel and is secured from behind with the supplied 1/4-20 nuts and lockwashers.

The handle is made from round steel; the drawing specifies CR steel. The finish is bright chrome plated. It is sold individually and mounting hardware is included.

Per the series ordering table, 1427M3 has 5.25 in (133 mm) mounting hole centres, a 2.06 in (52 mm) handle depth and a 0.38 in (10 mm) handle diameter, and is listed for a 12.25 in (311 mm) panel height. The part page gives its size (H x W x D) as 2 in x 5.25 in x 0.37 in (51 mm x 133 mm x 9 mm). On the drawing the overall width is 142.88 mm [5.625 in] and the overall height 52.37 mm [2.062 in], with 42.85 mm [1.687 in] of clearance inside the bar. Shipping weight is 0.3 lbs (0.14 kg).

Installation is through-panel: the handle carries external 1/4-20 UNC threaded studs set on 5.25 in (133 mm) centres, and is secured with the included 2 nuts and 2 internal tooth lockwashers. The part is listed as REACH compliant and RoHS compliant.