Hammond 1414N4PHE 6x6x4 in Type 4 Hinged Junction Box with Panel

The 1414N4PHE is a 6 x 6 x 4 in (152 x 152 x 102 mm) Type 4 mild steel junction box from the 1414 N4 PH Series, built with a stainless steel continuous hinge door secured by stainless steel clamps and screws. It serves as an instrument enclosure, electric, hydraulic or pneumatic control housing, junction box or terminal wiring enclosure where equipment may be hosed down or very wet, or outdoors for full weather protection.

The square 6 x 6 x 4 in 1414N4PHE gives a 5.30 in x 5.30 in door opening and a 4.88 in square inner panel, with 3.35 in of usable depth for small terminal and control assemblies.

The body is formed from 16 or 14 gauge steel and the cover from 14 gauge steel, with smooth, continuously welded seams and no knockouts, cutouts or holes. A seamless poured-in place gasket seals the cover. The continuous hinge can be removed by pulling the stainless steel hinge pin. A removable 14 gauge inner panel mounts on internal threaded weld studs and is finished in white powder coating. Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.

Per the drawing, the 1414N4PHE has a door opening of 5.30 in wide x 5.30 in high, 3.35 in of usable depth, and 5.10 in x 5.10 in of clear space available on the door. Welded brackets with 0.31 in mounting holes provide for enclosure mounting, and a bonding stud on the door plus a grounding stud on the body simplify grounding. Shipping weight is 4.88 lbs (2.21 kg).

Ratings: UL 508A Type 3R, 4, 12 and 13; CSA Type 3R, 4, 12 and 13; complies with NEMA Type 3R, 4, 12 and 13 and IEC 60529, IP66. RoHS and REACH compliant.