Modular Selection Guide
UHDM
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 | col13 | col14 | col15 | col16 | col17 | col18 | col19 | col20 | col21 | col22 | col23 | col24 | col25 | col26 | col27 | col28 | col29 | col30 | col31 | col32 | col33 | col34 | col35 | col36 | col37 | col38 | col39 | col40 | col41 | col42 | col43 | col44 | col45 | col46 | col47 | col48 | col49 | col50 | col51 | col52 | col53 | col54 | col55 | col56 | col57 | col58 | col59 | col60 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Disconnect Ordering Information | Disconnect Ordering Information | Disconnect Ordering Information | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ABB Controls Disconnect switch: Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 24.13" deep enclosures, platform must be used with shaft (not included) Handle: DSFHN-HS12 Circuit breaker: Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 Allen Bradley Bulletin 1494F flange mounted disconnect switch: Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) 1494D flange mounted circuit breaker operating mechanism: Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism Bulletin 1494U flange mounted disconnect switch: Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse clip kit (if required) Line and load connectors (if required) Bulletin 1494U flange mounted circuit breaker operating mechanism: Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) | ABB Controls | Disconnect switch: | Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 24.13" deep enclosures, platform must be used with shaft (not included) Handle: DSFHN-HS12 | Circuit breaker: | Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 | Allen Bradley | Bulletin 1494F flange mounted disconnect switch: | Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) | 1494D flange mounted circuit breaker operating mechanism: | Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism | Bulletin 1494U flange mounted disconnect switch: | Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse clip kit (if required) Line and load connectors (if required) | Bulletin 1494U flange mounted circuit breaker operating mechanism: | Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) | C-H Westinghouse Type C361 disconnect switch: Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 Flex-Shaft™ handle mechanism: Circuit breaker Complete Flex-Shaft™ handle mechanism General Electric Disconnect switch: Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) Circuit breaker: Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) Circuit breaker with a Spectra-Flex™ cable operator: Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable | C-H Westinghouse | Type C361 disconnect switch: | Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) | Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: | Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 | Flex-Shaft™ handle mechanism: | Circuit breaker Complete Flex-Shaft™ handle mechanism | General Electric | Disconnect switch: | Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | Circuit breaker: | Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | Circuit breaker with a Spectra-Flex™ cable operator: | Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable | I-T-E Siemens Disconnect switch: Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable: FHOEC048 Circuit breaker: Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep enclosures accept 36" or 48" cables; 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable Square D Disconnect switch: Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) Circuit breaker: Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) Class 9422 Type T disconnect switch with a cable mechanism: Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot Circuit breaker with a cable mechanism: Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | I-T-E Siemens | Disconnect switch: | Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable: FHOEC048 | Circuit breaker: | Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep enclosures accept 36" or 48" cables; 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable | Square D | Disconnect switch: | Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | Circuit breaker: | Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | Class 9422 Type T disconnect switch with a cable mechanism: | Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | Circuit breaker with a cable mechanism: | Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | |||||||||||||||
| ABB Controls | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 24.13" deep enclosures, platform must be used with shaft (not included) Handle: DSFHN-HS12 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Allen Bradley | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bulletin 1494F flange mounted disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1494D flange mounted circuit breaker operating mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bulletin 1494U flange mounted disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse clip kit (if required) Line and load connectors (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bulletin 1494U flange mounted circuit breaker operating mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| C-H Westinghouse | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type C361 disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Flex-Shaft™ handle mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Complete Flex-Shaft™ handle mechanism | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| General Electric | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker with a Spectra-Flex™ cable operator: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| I-T-E Siemens | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable: FHOEC048 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep enclosures accept 36" or 48" cables; 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Square D | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Class 9422 Type T disconnect switch with a cable mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker with a cable mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot |
UHDM
| col1 |
|---|
| ABB Controls |
| Disconnect switch: |
| Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 24.13" deep enclosures, platform must be used with shaft (not included) Handle: DSFHN-HS12 |
| Circuit breaker: |
| Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 |
| Allen Bradley |
| Bulletin 1494F flange mounted disconnect switch: |
| Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) |
| 1494D flange mounted circuit breaker operating mechanism: |
| Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism |
| Bulletin 1494U flange mounted disconnect switch: |
| Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse clip kit (if required) Line and load connectors (if required) |
| Bulletin 1494U flange mounted circuit breaker operating mechanism: |
| Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) |
UHDM
| col1 |
|---|
| C-H Westinghouse |
| Type C361 disconnect switch: |
| Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) |
| Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: |
| Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 |
| Flex-Shaft™ handle mechanism: |
| Circuit breaker Complete Flex-Shaft™ handle mechanism |
| General Electric |
| Disconnect switch: |
| Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) |
| Circuit breaker: |
| Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) |
| Circuit breaker with a Spectra-Flex™ cable operator: |
| Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable |
UHDM
| col1 |
|---|
| I-T-E Siemens |
| Disconnect switch: |
| Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable: FHOEC048 |
| Circuit breaker: |
| Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep enclosures accept 36" or 48" cables; 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable |
| Square D |
| Disconnect switch: |
| Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) |
| Circuit breaker: |
| Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) |
| Class 9422 Type T disconnect switch with a cable mechanism: |
| Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot |
| Circuit breaker with a cable mechanism: |
| Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot |