Multi-Door Selection Guide
ABB Controls Disconnect Switches (Flange Mounted Operators)
1 "M" dimension does not allow for auxiliary switches. Refer to Allen Bradley instructions if additional space is required. "K" = 9.88 when "A" = 72.13 (except 200A switch) "K" = 8.56 when "A" = 72.13 (200A switch) "K" = 15.88 when "A" = 84.13 (except 200A switch) "K" = 14.56 when "A" = 84.13 (200A switch) "K" = 18.88 when "A" = 90.13 (except 200A switch) "K" = 17.56 when "A" = 90.13 (200A switch) Charts reference Space Occupied by Disconnect Drawing.
Allen Bradley 1494U Operators (Disconnect Switches)
"K" = 11.88 when "A" = 72.13 "K" = 17.88 when "A" = 84.13 "K" = 20.88 when "A" = 90.13
Charts reference Space Occupied by Disconnect Drawing.
Space Occupied By Disconnect 1. Flex-Shaft™ System permits circuit breaker locations separate from flange mounted handle mechanism. 2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref “P”) required for line side conductors. 3. Select shaft length based on location of circuit breaker in the enclosure. Maintain a 4" minimum bending radius for the Flex-Shaft™. 4. Space occupied by circuit breaker is calculated by:
Charts reference Space Occupied by Disconnect Drawing.
"K" = 11.88 when "A" = 72.13 "K" = 17.88 when "A" = 84.13 "K" = 20.88 when "A" = 90.13
Charts reference Space Occupied by Disconnect Drawing.
Space Occupied By Disconnect 1. GE Spectra-Flex™ Operating Cables permit circuit breaker locations separate from flange mounted handle mechanism. 2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref "P") required for line side conductors. 3. Select shaft length based on location of circuit breaker in the enclosure. Maintain a 3" minimum bending radius for the Flex-Shaft™. 4. Space occupied by circuit breaker is calculated by:
"K" = 11.88 when "A" = 72.13 "K" = 17.88 when "A" = 84.13 "K" = 20.88 when "A" = 90.13
Charts reference Space Occupied by Disconnect Drawing.
Circuit Breaker Size includes required base mounting block. Last three digits of operator mechanism part number denote cable length in inches. 24" deep enclosures require longer operating cables. Sold separately.
"K" = 11.88 when "A" = 72.13 "K" = 17.88 when "A" = 84.13 "K" = 20.88 when "A" = 90.13 (Deduct 1.45 inches from “K” for FHONO48 Operator mechanism for MD,ND,PD,RD Circuit Breakers)
Space Occupied By Disconnect 1. I-T-E Max-Flex™ System permits circuit breaker locations separate from flange mounted handle mechanism. 2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref “P”) required for line side conductors. 3. See Siemens I-T-E instructions for disconnect location limitations when using 36" or 48" Max-Flex™ cables. 4. Space occupied by circuit breaker is calculated by:
Charts reference Space Occupied by Disconnect Drawing.
"K" = 11.88 when "A" = 72.13 "K" = 17.88 when "A" = 84.13 "K" = 20.88 when "A" = 90.1
Charts reference Space Occupied by Disconnect Drawing.
Use cable mechanism with circuit breaker and 9422-A1 handle mechanism Cable operators are offered in 3’, 5’, and 10’ lengths. Last 2 digits of part numbers above (30) are for 3’ cables
Space Occupied By Disconnect Switch 1. Square D Cable System permits circuit breaker locations separate from flange mounted handle mechanism. 2. See National Electrical Code 2005 article 430-10(b) for wiring space (Ref "P") required for line side conductors. 3. Select cable mechanism length based on disconnect location in enclosure. See Square D instructions for minimum cable bend radius. 4. Space occupied by circuit breaker is calculated by:
"K" = 11.88 when "A" = 72.13 "K" = 17.88 when "A" = 84.13 "K" = 20.88 when "A" = 90.13
Charts reference Space Occupied by Disconnect Drawing.
- ■F,J,K frame Flex-Shafts™ available in 3' to 10' lengths.
- ■L,N,R frame Flex-Shafts™ available in 4' to 6' lengths.
- ■Overall (Height "X" and Width "Y")
- ■Minimum wire bend space (manufacturer specified)
- ■Location "M" from right to left.
- ■Overall (Height "X" and Width "Y")
- ■Minimum wire bend space (manufacturer specified)
- ■Location "M" from right to left.
- ■Overall (Height "X" and Width "Y")
- ■Minimum wire bend space (manufacturer specified)
- ■Location "M" from right to left.
- ■Overall (Height "X" and Width "Y")
- ■Minimum wire bend space (manufacturer specified)
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 | col13 | col14 | col15 | col16 | col17 | col18 | col19 | col20 | col21 | col22 | col23 | col24 | col25 | col26 | col27 | col28 | col29 | col30 | col31 | col32 | col33 | col34 | col35 | col36 | col37 | col38 | col39 | col40 | col41 | col42 | col43 | col44 | col45 | col46 | col47 | col48 | col49 | col50 | col51 | col52 | col53 | col54 | col55 | col56 | col57 | col58 | col59 | col60 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ABB Controls Disconnect switch: Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 20.13" deep enclosures use DSFHS-22 24.13" deep enclosures, platform must be used with shaft (not included) Hhandle: DSFHN-HS12 Circuit breaker: Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 20.13" deep enclosures use K7FHD-S22 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 Allen Bradley Bulletin 1494F flange mounted disconnect switch: Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) 1494D flange mounted circuit breaker operating mechanism, order: Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism Bulletin 1494U flange mounted disconnect switch, order: Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse kit (if required) Line and load connectors (if required) Bulletin 1494U flange mounted circuit breaker operating mechanism, order: Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) | ABB Controls | Disconnect switch: | Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 20.13" deep enclosures use DSFHS-22 24.13" deep enclosures, platform must be used with shaft (not included) Hhandle: DSFHN-HS12 | Circuit breaker: | Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 20.13" deep enclosures use K7FHD-S22 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 | Allen Bradley | Bulletin 1494F flange mounted disconnect switch: | Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) | 1494D flange mounted circuit breaker operating mechanism, order: | Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism | Bulletin 1494U flange mounted disconnect switch, order: | Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse kit (if required) Line and load connectors (if required) | Bulletin 1494U flange mounted circuit breaker operating mechanism, order: | Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) | C-H Westinghouse Type C361 disconnect switch: Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 Flex-Shaft™ handle mechanism: Circuit breaker Complete Flex-Shaft™ handle mechanism General Electric Disconnect switch: Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) Circuit breaker: Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) Circuit breaker with a Spectra-Flex™ cable operator: Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable | C-H Westinghouse | Type C361 disconnect switch: | Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) | Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: | Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 | Flex-Shaft™ handle mechanism: | Circuit breaker Complete Flex-Shaft™ handle mechanism | General Electric | Disconnect switch: | Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | Circuit breaker: | Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | Circuit breaker with a Spectra-Flex™ cable operator: | Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable | I-T-E Siemens Disconnect switch: Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable FHOEC048 Circuit breaker: Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep or 24.13" deep enclosures accept 36" or 48" cables 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable Square D Disconnect switch: Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) Circuit breaker: Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) Class 9422 Type T disconnect switch with a cable mechanism: Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot Circuit breaker with a cable mechanism: Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | I-T-E Siemens | Disconnect switch: | Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable FHOEC048 | Circuit breaker: | Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep or 24.13" deep enclosures accept 36" or 48" cables 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable | Square D | Disconnect switch: | Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | Circuit breaker: | Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | Class 9422 Type T disconnect switch with a cable mechanism: | Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | Circuit breaker with a cable mechanism: | Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | |||||||||||||||
| ABB Controls | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 20.13" deep enclosures use DSFHS-22 24.13" deep enclosures, platform must be used with shaft (not included) Hhandle: DSFHN-HS12 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 20.13" deep enclosures use K7FHD-S22 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Allen Bradley | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bulletin 1494F flange mounted disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1494D flange mounted circuit breaker operating mechanism, order: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bulletin 1494U flange mounted disconnect switch, order: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse kit (if required) Line and load connectors (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bulletin 1494U flange mounted circuit breaker operating mechanism, order: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| C-H Westinghouse | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type C361 disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Flex-Shaft™ handle mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Complete Flex-Shaft™ handle mechanism | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| General Electric | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker with a Spectra-Flex™ cable operator: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| I-T-E Siemens | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable FHOEC048 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep or 24.13" deep enclosures accept 36" or 48" cables 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Square D | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Class 9422 Type T disconnect switch with a cable mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker with a cable mechanism: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot |
UHD
| col1 |
|---|
| ABB Controls |
| Disconnect switch: |
| Flange operated switch (fusible or non-fusible) Shaft: 18.13" deep enclosures use DSFHS-17 20.13" deep enclosures use DSFHS-22 24.13" deep enclosures, platform must be used with shaft (not included) Hhandle: DSFHN-HS12 |
| Circuit breaker: |
| Circuit breaker: ABB Operating mechanism Shaft: 18.13" deep enclosures use K7FHD-S17 20.13" deep enclosures use K7FHD-S22 24.13" deep enclosures, platform must be used with shaft (not included) Handle mechanism: K7FHD-HS12 |
| Allen Bradley |
| Bulletin 1494F flange mounted disconnect switch: |
| Disconnect switch Fuse block adaptor (if required) Line and load connectors (if required) |
| 1494D flange mounted circuit breaker operating mechanism, order: |
| Circuit breaker: C-H Westinghouse Flange mounted operating mechanism Slide mechanism |
| Bulletin 1494U flange mounted disconnect switch, order: |
| Disconnect switch Operating handle Connecting rod/rods (long) Trailer fuse block kit (if required) Fuse kit (if required) Line and load connectors (if required) |
| Bulletin 1494U flange mounted circuit breaker operating mechanism, order: |
| Circuit breaker: C-H Westinghouse Operating mechanism Operating handle Connecting rod (long) |
UHD
| col1 |
|---|
| C-H Westinghouse |
| Type C361 disconnect switch: |
| Disconnect switch with an operating mechanism Operating handle: C361H1 or C361H3 In 24.13" deep enclosures, platform must be used with shaft (not included) |
| Type C371 circuit breaker operating mechanism with a C-H Westinghouse circuit breaker: |
| Circuit breaker Operating mechanism Long operating rod (if required) Operating handle: 150 amp - C371H1 or C371H3 250 through 1200 amp - C371H5 or C371H7 |
| Flex-Shaft™ handle mechanism: |
| Circuit breaker Complete Flex-Shaft™ handle mechanism |
| General Electric |
| Disconnect switch: |
| Disconnect switch: Type QMR or QMW Fuse clip kit or no-fuse kit Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) |
| Circuit breaker: |
| Circuit breaker Flange handle: STDA1 or STDA2 Variable depth operating mechanism Extended length drive rod (if required) |
| Circuit breaker with a Spectra-Flex™ cable operator: |
| Circuit breaker Flange mounted handle mechanism: 150 to 600 amps - STDA1 SK1200 - STDA3 Breaker mounted mechanism Operating cable |
UHD
| col1 |
|---|
| I-T-E Siemens |
| Disconnect switch: |
| Basic switch (right-hand) Fuse or no-fuse kit Flange mounted handle: FHOHS Switch operator Operating cable FHOEC048 |
| Circuit breaker: |
| Circuit breaker Pressure wire connectors Flange mounted handle: 100 to 600 - FHOH 800 to 2000 - FHOHN Circuit breaker operator mechanism Operating cable: 18.13" deep or 24.13" deep enclosures accept 36" or 48" cables 24.13" deep enclosures require a 48" cable These items are available from Siemens I-T-E as a complete mechanism with a 36" operating cable only Order items separately when using a 48" cable |
| Square D |
| Disconnect switch: |
| Disconnect switch with operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) |
| Circuit breaker: |
| Circuit breaker Operating mechanism Universal handle mechanism: Type A-1 Long operating rod (if required) |
| Class 9422 Type T disconnect switch with a cable mechanism: |
| Disconnect switch with operating mechanism: Class 9422, Type T Handle mechanism: Class 9422, Type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot |
| Circuit breaker with a cable mechanism: |
| Circuit breaker: Square D Handle mechanism: Class 9422, type A-1 Cable mechanism: Class 9422 CFT_O, 3, 5, or 10 foot |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | ABB Switch Number | Amp Rating | Fuse Clip | Fuse Class | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | ABB Switch Number | Amp Rating | Fuse Clip | Fuse Class | L | M | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | OETL-NF30-F | 30A | No Fuse | — | 4.78 | 7.72 | 11.80 | 17.80 | 20.80 |
| • | • | • | OETL-NF60-F | 60A | No Fuse | — | 4.78 | 7.40 | 11.80 | 17.80 | 20.80 |
| • | • | • | OETL-NF100-F | 100A | No Fuse | — | 5.22 | 8.78 | 11.37 | 17.37 | 20.37 |
| • | • | • | OETL-NF175-F | 175A | No Fuse | — | 5.07 | 7.68 | 10.48 | 16.48 | 19.48 |
| • | • | • | OETL-NF200-F | 200A | No Fuse | — | 5.07 | 8.47 | 10.48 | 16.48 | 19.48 |
| • | • | • | OESA-F30J6-F | 30A | 30A-600V | J | 4.78 | 7.72 | 11.80 | 17.80 | 20.80 |
| • | • | • | OESA-F60J6-F | 60A | 60A-600V | J | 4.78 | 7.40 | 11.80 | 17.80 | 20.80 |
| • | • | • | OESA-F100J6-F | 100A | 100A-600V | J ¹ | 5.22 | 8.78 | 11.37 | 17.37 | 20.37 |
| 200A ² |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | ISOMAX Circuit Breaker | Amp Rating | Operating Mechanism | Frame Type | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | ISOMAX Circuit Breaker | Amp Rating | Operating Mechanism | Frame Type | L | M | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | S1N100TL | 100A | K2FHD-M | S1 | 5.30 | 4.57 | 12.33 | 18.33 | 21.33 |
| • | • | • | S3N150TW | 150A | K3FHD-M | S3 | 6.67 | 4.99 | 11.73 | 17.73 | 20.73 |
| • | • | • | S3N225TW | 225A | K3FHD-M | S3 | 6.67 | 4.99 | 11.73 | 17.73 | 20.73 |
| • | • | • | S4N250BW | 250A | K4FHD-M | S4 | 8.45 | 4.99 | 10.20 | 16.20 | 19.20 |
| • | • | • | S5N400TW | 400A | K5FHD-M | S5 | 8.45 | 6.37 | 10.20 | 16.20 | 19.20 |
| • | • | • | S6N600TW | 600A | K6FHD-M | S6 | 8.33 | 9.97 | 9.53 | 15.53 | 18.53 |
| • | • | • | S6N800TW | 800A | K6FHD-M | S6 | 8.33 | 9.97 | 9.53 | 15.53 | 18.53 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Allen Bradley Type Number | Amp Rating | Fuse Clip | Fuse Class | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | Allen Bradley Type Number | Amp Rating | Fuse Clip | Fuse Class | L | M¹ | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | N30 | 30A | No Fuse | — | 4.62 | 6.50 | 9.31 | 15.31 | 18.31 |
| • | • | • | NF30 | 30A | 30A-250V | H, K, R | 6.50 | 6.50 | 9.31 | 15.31 | 18.31 |
| • | • | • | NF30 | 30A | 60A-250V | H, K, R | 7.25 | 6.50 | 9.31 | 15.31 | 18.31 |
| • | • | • | NF30 | 30A | 30A-600V | H, K, R | 9.25 | 6.50 | 9.31 | 15.31 | 18.31 |
| • | • | • | NF30 | 30A | 60A-600V | H, K, R | 9.75 | 6.50 | 9.31 | 15.31 | 18.31 |
| • | • | • | NF30 | 30A | 30A-600V | J | 6.50 | 6.50 | 9.31 | 15.31 | 18.31 |
| • | • | • | NF30 | 30A | 60A-600V | J | 6.62 | 6.50 | 9.31 | 15.31 | 18.31 |
| • | • | • | N60 | 60A | No Fuse | — | 4.62 | 6.50 | 8.62 | 14.62 | 17.62 |
| • | • | • | NF60 | 60A | 30A-600V | H, K, R | 10.38 | 6.50 | 8.62 | 14.62 | 17.62 |
| • | • | • | NF60 | 60A | 60A-250V | H, K, R | 8.38 | 6.50 | 8.62 | 14.62 | 17.62 |
| • | • | • | NF60 | 60A | 100A-250V | H, K, R | 10.88 | 6.50 | 8.62 | 14.62 | 17.62 |
| • | • | • | NF60 | 60A | 60A-600V | H, K, R | 10.88 | 6.50 | 8.62 | 14.62 | 17.62 |
| • | • | • | NF60 | 60A | 100A-600V | H, K, R | 12.88 | 6.62 | 8.62 | 14.62 | 17.62 |
| • | • | • | NF60 | 60A | 60A-600V | J | 7.75 | 6.50 | 8.62 | 14.62 | 17.62 |
| • | • | • | NF60 | 60A | 100A-600V | J | 9.75 | 6.50 | 8.62 | 14.62 | 17.62 |
| • | • | • | N100 | 100A | No Fuse | — | 4.62 | 7.25 | 6.75 | 12.75 | 15.75 |
| • | • | • | NF100 | 100A | 100A-250V | H, K, R | 11.38 | 7.38 | 6.75 | 12.75 | 15.75 |
| • | • | • | NF100 | 100A | 200A-250V | H, K, R | 12.25 | 7.62 | 6.75 | 12.75 | 15.75 |
| • | • | • | NF100 | 100A | 100A-600V | H, K, R | 13.38 | 7.50 | 6.75 | 12.75 | 15.75 |
| • | • | • | NF100 | 100A | 200A-600V | H, K, R | 14.75 | 7.75 | 6.75 | 12.75 | 15.75 |
| • | • | • | NF100 | 100A | 100A-600V | J | 10.12 | 7.38 | 6.75 | 12.75 | 15.75 |
| • | • | • | NF100 | 100A | 200A-600V | J | 10.88 | 7.50 | 6.75 | 12.75 | 15.75 |
| • | • | • | N200 | 200A | No Fuse | — | 7.12 | 10.38 | 5.12 | 11.12 | 14.12 |
| • | • | • | NF200 | 200A | 200A-250V | H, K, R | 15.00 | 10.38 | 5.12 | 11.12 | 14.12 |
| • | • | • | NF200 | 200A | 400A-250V | H, K, R | 16.56 | 10.75 | 5.12 | 11.12 | 14.12 |
| • | • | • | NF200 | 200A | 200A-600V | H, K, R | 17.56 | 10.38 | 5.12 | 11.12 | 14.12 |
| • | • | • | NF200 | 200A | 400A-600V | H, K, R | 19.56 | 11.00 | 5.12 | 11.12 | 14.12 |
| • | • | • | NF200 | 200A | 200A-600V | J | 13.69 | 10.38 | 5.12 | 11.12 | 14.12 |
| • | • | • | NF200 | 200A | 400A-600V | J | 15.00 | 10.62 | 5.12 | 11.12 | 14.12 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 |
|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Alan Bradley Type Number | Amp Rating | Circuit Breker Type | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | Alan Bradley Type Number | Amp Rating | Circuit Breker Type | L | M¹ | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | N4/N40 | 150A | C-H Westinghouse EHD, FD, FDB, FDC, HFD, HMCP | 5.81 | 4.56 | 9.25 | 15.25 | 18.25 |
| • | • | • | N5/N50 | 250A | C-H Westinghouse JD, JDB, JDC, HJD, HMCP | 8.81 | 4.75 | 8.44 | 14.44 | 17.44 |
| • | • | • | N5/N60 | 400A | C-H Westinghouse KD, KDB, DK, HKD, HMCP | 8.81 | 5.88 | 8.50 | 14.50 | 17.50 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Allen Bradley Switch Number | Amp Rating | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P | ||
| 72.13 | 84.13 | 90.13 | Allen Bradley Switch Number | Amp Rating | Fuse Clip | Fuse Class | L | M¹ | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | DS30 | 30A | No Fuse | — | 3.88 | 6.75 | 10.00 | 16.00 | 19.00 |
| • | • | • | DS30 | 30A | 30A-250V | H,K,R | 5.25 | 6.75 | 10.00 | 16.00 | 19.00 |
| • | • | • | DS30 | 30A | 30A-600V | H,K,R | 8.00 | 6.75 | 10.00 | 16.00 | 19.00 |
| • | • | • | DS30 | 30A | 30A-600V | J | 5.25 | 6.75 | 10.00 | 16.00 | 19.00 |
| • | • | • | DS30 | 30A | 60A-250V | H,K | 6.00 | 6.75 | 10.00 | 16.00 | 19.00 |
| • | • | • | DS30 | 30A | 60A-600V | H,K | 8.50 | 6.75 | 10.00 | 16.00 | 19.00 |
| • | • | • | DS30 | 30A | 60A-600V | J | 5.38 | 6.75 | 10.00 | 16.00 | 19.00 |
| • | • | • | DS60 | 60A | No Fuse | — | 3.88 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS60 | 60A | 60A-250V | H,K,R | 6.00 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS60 | 60A | 60A-600V | H,K,R | 8.50 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS60 | 60A | 60A-600V | J | 5.38 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS60 | 60A | 30A-600V | H,K,R | 8.00 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS60 | 60A | 100A-250V | H,K | 8.50 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS60 | 60A | 100A-600V | H,K | 10.50 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS60 | 60A | 100A-600V | J | 7.25 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS100² | 100A | No Fuse | — | 3.88 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS100² | 100A | 100A-250V | H,K,R | 8.12 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS100² | 100A | 100A-600V | H,K,R | 10.12 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS100² | 100A | 100A-600V | J | 6.80 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS100² | 100A | 60A-600V | H,K,R | 10.12 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS100² | 100A | 60A-600V | J | 8.88 | 6.75 | 9.81 | 15.81 | 18.81 |
| • | • | • | DS200² | 200A | No Fuse | — | 4.75 | 8.00 | 8.34 | 14.34 | 17.34 |
| • | • | • | DS200² | 200A | 200A-250V | H,K,R | 10.88 | 8.00 | 8.34 | 14.34 | 17.34 |
| • | • | • | DS200² | 200A | 200A-600V | H,K,R | 13.88 | 8.00 | 8.34 | 14.34 | 17.34 |
| • | • | • | DS200² | 200A | 200A-600V | J | 9.50 | 8.00 | 8.34 | 14.34 | 17.34 |
| • | • | • | DS200² | 200A | 100A-600V | H,K,R | 12.00 | 8.00 | 8.34 | 14.34 | 17.34 |
| • | • | • | DS200² | 200A | 100A-600V | J | 8.75 | 8.00 | 8.34 | 14.34 | 17.34 |
| • | • | DS400 | 400A | No Fuse | — | 10.75 | 11.00 | 10.14 | 13.14 | ||
| • | • | DS400 | 400A | 400A-250V | H,K,R | 16.12 | 11.00 | 10.14 | 13.14 | ||
| • | • | DS400 | 400A | 400A-600V | H,K,R | 19.12 | 11.00 | 10.14 | 13.14 | ||
| • | • | DS400 | 400A | 400A-600V | J | 14.62 | 11.00 | 10.14 | 13.14 | ||
| • | DS600 | 600A | No Fuse | — | 10.75 | 11.00 | 13.14 | ||||
| • | DS600 | 600A | 600A-250V | H,R | 10.75 | 11.00 | 13.14 | ||||
| • | DS600 | 600A | 600A-600V | H,R | 10.75 | 11.00 | 13.14 | ||||
| • | DS600 | 600A | 600A-600V | J | 17.59 | 11.00 | 13.14 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 |
|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Allen Bradley Type Number | Amp Rating | Frame Type | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | Allen Bradley Type Number | Amp Rating | Frame Type | L | M¹ | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | M40 | 15A-150A | C-H Westinghouse EHD,FD,FDB,FDC,HFD,HMCP | 5.00 | 4.62 | 11.25 | 17.25 | 20.25 |
| • | • | • | M50 | 70A-250A | C-H Westinghouse JD,JDB,JDC,HJD,HMCP | 9.75 | 4.88 | 10.81 | 16.81 | 19.81 |
| • | • | • | M60 | 100A-400A | C-H Westinghouse KD,KDB,DK,HKD,HMCP | 9.69 | 6.25 | 10.62 | 16.62 | 19.62 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Cutler Hammer Type Number | Amp Rating | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P | ||
| 72.13 | 84.13 | 90.13 | Cutler Hammer Type Number | Amp Rating | Fuse Clip | Fuse Class | L | M¹ | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | C361NC | 30A | No Fuse | — | 5.75 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361SC21 | 30A | 30A-250V | H, K, R | 8.38 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361SC61 | 30A | 60A-250V | H, K, R | 8.38 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361SC61 | 30A | 30A-600V | H, J, K, R | 8.38 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361ND | 60A | No Fuse | — | 5.75 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361SD22 | 60A | 60A-250V | H, K, R | 8.38 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361SD22 | 60A | 30A-600V | J | 8.38 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361SD62 | 60A | 60A-600V | H, K, R | 8.38 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361SD62 | 60A | 60A-600V | J | 8.38 | 7.55 | 10.50 | 16.50 | 19.50 |
| • | • | • | C361NE | 100A | No Fuse | — | 5.56 | 9.07 | 10.06 | 16.06 | 19.06 |
| • | • | • | C361SE263 | 100A | 100A-250V | H, K, R | 10.31 | 9.07 | 10.06 | 16.06 | 19.06 |
| • | • | • | C361SE263 | 100A | 100A-600V | H, K, R | 10.31 | 9.07 | 10.06 | 16.06 | 19.06 |
| • | • | • | C361SE263 | 100A | 100A-600V | J | 10.31 | 9.07 | 10.06 | 16.06 | 19.06 |
| • | • | • | C361NF | 200A | No Fuse | — | 13.06 | 10.12 | 8.06 | 14.12 | 17.12 |
| • | • | • | C361SF264 | 200A | 200A-250V | H, K, R | 13.06 | 10.12 | 8.06 | 14.12 | 17.12 |
| • | • | • | C361SF264 | 200A | 200A-600V | H, K, R | 13.06 | 10.12 | 8.06 | 14.12 | 17.12 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 |
|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Cutler Hammer Mechanisms | Amp Rating | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P | |
| 72.13 | 84.13 | 90.13 | Cutler Hammer Mechanisms | Amp Rating | Frame Type | L | M | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | C371E | 150A | F Frame EHD,FDB,FD,HFD,FDC | 6.00 | 5.62 | 11.62 | 17.62 | 20.62 |
| • | • | • | C371E | 150A | F Frame HMCP | 6.00 | 5.62 | 11.62 | 17.62 | 20.62 |
| • | • | • | C371F | 250A | J Frame JDB,JD,HJD,JDC | 8.94 | 8.12 | 11.44 | 17.44 | 20.50 |
| • | • | • | C371F | 250A | J Frame HMCP | 10.94 | 8.12 | 11.44 | 17.44 | 20.50 |
| • | • | • | C371F | 400A | K Frame DK,KDB,KD,HKD | 9.75 | 8.12 | 11.00 | 17.00 | 20.00 |
| • | • | • | C371F | 400A | K Frame HMCP | 9.75 | 8.12 | 11.00 | 17.00 | 20.00 |
| • | • | • | C371G | 600A | L Frame LD,HLD,LDC | 8.44 | 12.00 | 9.38 | 15.38 | 18.38 |
| • | • | C371G | 600A | L Frame HMCP | 8.44 | 12.00 | 9.38 | 15.38 | 18.38 | |
| • | • | C371K | 800A | M Frame MD,MDS | 10.25 | 12.00 | — | 11.81 | 14.81 | |
| ¹ | • | C371K | 1200A | M Frame ND,HND,NDC | 10.25 | 12.00 | — | 11.81 | 14.81 |
UHD
| col1 | col2 | col3 | col4 | col5 |
|---|---|---|---|---|
| Complete Operator | Complete Operator | Breaker Height "X" | Breaker Width "Y" | |
| Mechanisms | Amp Rating | Frame Type | (in inches) | (in inches) |
| F1S03 | 150A | F Frame EHD,FDB,FD,HFD | 6.00 | 4.12 |
| F1S03 | 150A | F Frame HMCP | 6.00 | 4.12 |
| F2S03 | 250A | J Frame JDB,JD,HJD,JDC | 10.00 | 4.12 |
| F2S03 | 250A | J Frame HMCP | 10.00 | 4.12 |
| F3S03 | 400A | K Frame DK,KDB,KD,HKD | 10.12 | 5.50 |
| F3S03 | 400A | K Frame HMCP | 12.45 | 5.50 |
| F4S04 | 600A | L Frame LD,HLD,LDC | 10.75 | 8.25 |
| F4S04 | 600A | L Frame HMCP | 12.50 | 8.25 |
| F7S04 | 800A | M Frame MD,MDS | 16.00 | 8.25 |
| F5S04 | 1200A | N Frame ND,HND,NDC | 16.00 | 8.25 |
| F6S04 | 2500A | R Frame RD,CRD, RDC | 16.00 | 15.50 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | General Electric Switch Mechanisms | Amp Rating | Fuse Clip | Fuse Class | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | General Electric Switch Mechanisms | Amp Rating | Fuse Clip | Fuse Class | L | M | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | TDOM1A | 30A | No Fuse | — | 6.88 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1A | 30A | 30A-250V | H, R | 6.88 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 30A | 30A-600V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 30A | 60A-250V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 30A | 60A-600V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1A | 60A | No Fuse | — | 6.88 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 60A | 60A-250V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 60A | 60A-600V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 60A | 100A-250V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 60A | 100A-600V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1A | 100A | No Fuse | — | 6.88 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 100A | 100A-250V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 100A | 100A-600V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 100A | 200A-250V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM1B | 100A | 200A-600V | H, R | 11.50 | 5.38 | 12.38 | 18.38 | 21.38 |
| • | • | • | TDOM2 | 200A | No Fuse | — | 7.00 | 9.25 | 9.69 | 15.69 | 18.69 |
| • | • | • | TDOM2 | 200A | 200A-250V | H, R | 15.38 | 9.25 | 9.69 | 15.69 | 18.69 |
| • | • | • | TDOM2 | 200A | 200A-600V | H, R | 15.38 | 9.25 | 9.69 | 15.69 | 18.69 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 |
|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | General Electric Circuit Breaker Mechanisms | Amp Rating | Frame Type | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | General Electric Circuit Breaker Mechanisms | Amp Rating | Frame Type | L | M | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | SDOM1A | 150A | TEB, TED, THED | 6.88 | 5.38 | 11.24 | 17.24 | 20.24 |
| • | • | • | SDOM1A | 150A | TEC | 6.88 | 5.38 | 11.24 | 17.24 | 20.24 |
| • | • | • | TDOM1B | 150A | TB1 | 11.50 | 5.38 | 11.24 | 17.24 | 20.24 |
| • | • | • | TDOM1B | 150A | TEC, TECL | 11.50 | 5.38 | 11.24 | 17.24 | 20.24 |
| • | • | • | TDOM1C | 150A | TEL | 6.88 | 5.38 | 11.24 | 17.24 | 20.24 |
| • | • | • | TDOM1D | 150A | THLC1 | 6.88 | 5.38 | 9.87 | 15.87 | 18.87 |
| • | • | • | TDOM3 | 225A | TFJ | 10.38 | 5.88 | 10.81 | 16.81 | 19.81 |
| • | • | • | TDOM3 | 225A | TFK, THFK, TFL | 10.38 | 5.88 | 10.81 | 16.81 | 19.81 |
| • | • | • | TDOM4 | 400A | TJJ, TJK4, THJK4, TJL4V | 8.25 | 9.50 | 9.91 | 15.91 | 18.91 |
| • | • | • | TDOM4 | 600A | TJK6, THJK6, TJ4V, TJL4V | 8.25 | 9.50 | 9.91 | 15.91 | 18.91 |
| • | • | • | TDOM5 | 400A | TB4, TJH6S | 14.25 | 9.50 | 9.91 | 15.91 | 18.91 |
| • | • | TDOM6 | 225A | TLB2, THLC2 | 11.75 | 9.50 | — | 15.35 | 18.35 | |
| • | • | TDOM6 | 400A | TLB4, THLC4 | 11.75 | 9.50 | — | 13.97 | 16.97 | |
| • | TDOM6 | 800/1200A | TKMA, THKMA, TK4V | 11.75 | 9.50 | — | — | 18.38 | ||
| • | TDOM6 | 1200A | TK4BV, THK4V | 11.75 | 9.50 | — | — | 18.38 | ||
| • | • | TDOM7 | 600A | TB6 | 18.12 | 9.50 | — | 12.25 | 15.25 | |
| • | • | TDOM7 | 800A | TB8 | 18.12 | 9.50 | — | 12.25 | 15.25 | |
| • | TDOM7 | 1200A | TKL12S | 18.12 | 9.50 | — | — | 15.25 | ||
| • | • | • | SD0M1A | 150A | SE150 | 6.88 | 5.38 | 11.24 | 17.24 | 20.24 |
| • | • | • | SD0M3 | 250A | SPECTRA SF250 | 10.38 | 5.88 | 10.81 | 16.81 | 19.81 |
| • | • | SD0M4 | 600A | SPECTRA SG600 | 10.00 | 7.12 | — | 13.18 | 16.18 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 |
|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Circuit Breaker Height | Circuit Breaker Width | ||
| 72.13 | 84.13 | 90.13 | Max Frame Size | Amp Rating | "X" | "Y" |
| • | • | • | E150 | 150A | 6.31 | 4.12 |
| • | • | • | SE150 | 150A | 6.31 | 4.12 |
| • | • | • | SF250 | 250A | 10.12 | 4.12 |
| • | • | • | SG600 | 600A | 10.09 | 5.50 |
| • | • | • | SK1200 | 1200A | 15.50 | 8.25 |
UHD
| col1 | col2 | col3 | col4 |
|---|---|---|---|
| Frame Size | Breaker Mechanism | Flange Mounting Handle¹ | Operating Cable² |
| E150 | SCOM1A | SCH1 | SC3L |
| SE150/SF250 | SCOM1EF | SCH1 | SC3L |
| SG600 | SCOM1G | SCH1 | SC3L |
| SK1200 | SCOM1K | SCH2k | SC3H |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 |
|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Disconnect Height "X" | Disconnect Width "Y" | ||||
| 72.13 | 84.13 | 90.13 | ITE Switch Type | Amp Rating | Fuse Clip | Fuse Class | Disconnect Height "X" | Disconnect Width "Y" |
| • | • | • | MCS603R | 30A | No Fuse | — | 5.52 | 6.13 |
| • | • | • | MCS603R | 30A | 30A-250V | H,K,R | 8.11 | 6.13 |
| • | • | • | MCS603R | 30A | 30A-600V | H,K,R | 10.11 | 6.13 |
| • | • | • | MCS603R | 30A | 30A-600V | J | 8.48 | 6.13 |
| • | • | • | MCS606R | 60A | No Fuse | — | 5.52 | 6.13 |
| • | • | • | MCS606R | 60A | 60A-250V | H,K,R | 7.86 | 6.13 |
| • | • | • | MCS606R | 60A | 60A-600V | H,K,R | 10.38 | 6.13 |
| • | • | • | MCS606R | 60A | 60A-600V | J | 8.36 | 6.13 |
| • | • | • | MCS610R | 100A | No Fuse | — | 7.59 | 7.38 |
| • | • | • | MCS610R | 100A | 100A-250V | H,K,R | 11.85 | 7.38 |
| • | • | • | MCS610R | 100A | 100A-600V | H,K,R | 13.85 | 7.38 |
| • | • | • | MCS610R | 100A | 100A-600V | J | 10.60 | 7.38 |
| • | • | • | MCS620R | 200A | No Fuse | — | 9.00 | 9.17 |
| • | • | • | MCS620R | 200A | 200A-250V | H,K,R | 14.70 | 9.17 |
| • | • | • | MCS620R | 200A | 200A-600V | H,K,R | 17.20 | 9.17 |
| • | • | • | MCS620R | 200A | 200A-600V | J | 13.32 | 9.17 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 |
|---|---|---|---|---|---|
| Complete Operator Mechansim | Amp Rating | Breaker Frame Size | |||
| Complete Operator Mechansim | Amp Rating | Breaker Frame Size | Circuit Breaker Type | Circuit Breaker Height "X" | Circuit Breaker Width "Y" |
| FHOE036 | 125A | ED | ED2, ED4, ED6, HED4, HED6 | 6.34 | 3.00 |
| FHOE036 | 125A | CED | CED6 | 9.58 | 3.00 |
| FHOF036 | 250A | FD | FXD6-A, FD6-A, HFD6, FXD6-ETJ, HHFD6, HHFXD6 | 9.50 | 4.50 |
| FHOF036 | 250A | CFD | CFD6, CFD6-ETI | 14.25 | 4.50 |
| FHOJ036 | 400A, 600A | JD, LD | JXD2, LXD6, JD6, LD6, HJD6, HLD6, HHJD6, HHLD6, HHJXD6, HHLDX6, JXD6-ETI, LXD6-ETI | 11.00 | 7.50 |
| FHOJ036 | 400A, 600A | CJD,CLD | CJD6, CLD6, CJD6-ETI, CLD6-ETI | 17.86 | 7.50 |
| FHOLMO36 | 800A | LMD | LMD6, LMXD6, HLMD6, HLMXD6, LMXD6-ETI | 16.00 | 9.00 |
| FHON048 | 800A, 1200A | MD, ND | MD6, ND6, MXD6, NXD6,HMD6, HND6, HMXD6, HNXD6, CMD6, CND6, MXD6-ETI, CMD6-ETI | 24.00 | 9.00 |
| FHONO48 | 1600A, 2000A | PD,RD | PD6, RD6, PXD6, RXD6, HPD6, HRD6, HPXD6, HRXD6, CPD6 | 24.50 | 13.63 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 | col12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Square D Type Number | Amp Rating | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P | ||
| 72.13 | 84.13 | 90.13 | Square D Type Number | Amp Rating | Fuse Clip | Fuse Class | L | M | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | TCN-30 | 30A | No Fuse | — | 3.80 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TCF-30 | 30A | 30A-250V | H, K, R | 5.53 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TCF-33 | 30A | 30A-600V | H, K, R | 8.15 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TCF-33 | 30A | 60A-250V | H, K, R | 6.15 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TCF-33 | 30A | 30A-600V | J | 5.53 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TDN-60 | 60A | No Fuse | — | 3.80 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TDF-60 | 60A | 30A-600V | H, K, R | 8.15 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TDF-60 | 60A | 60A-250V | H, K, R | 6.15 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TDF-63 | 60A | 60A-600V | H, K, R | 8.65 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TDF-63 | 60A | 60A-600V | J | 5.53 | 6.97 | 10.75 | 16.75 | 19.75 |
| • | • | • | TEN-10 | 100A | No Fuse | — | 3.80 | 6.97 | 10.62 | 16.62 | 19.62 |
| • | • | • | TEF-10 | 100A | 100A-250V | H, K, R | 8.25 | 6.97 | 10.62 | 16.62 | 19.62 |
| • | • | • | TEF-10 | 100A | 100A-600V | H, K, R | 10.25 | 6.97 | 10.62 | 16.62 | 19.62 |
| • | • | • | TEF-10 | 100A | 100A-600V | J | 7.05 | 6.97 | 10.62 | 16.62 | 19.62 |
| • | • | • | TEF-13 | 100A | 200A-600V | J | — | — | 10.62 | 16.62 | 19.62 |
| • | • | • | TC-1 | 30A | No Fuse | — | 5.75 | 6.12 | 9.88 | 15.88 | 18.88 |
| • | • | • | TC-2 | 30A | 30A-250V | H, K, R | 5.75 | 6.12 | 9.88 | 15.88 | 18.88 |
| • | • | • | TC-3 | 30A | 30A-600V | H, K, R | 7.75 | 6.12 | 9.88 | 15.88 | 18.88 |
| • | • | • | TC-3 | 30A | 60A-250V | H, K, R | 5.88 | 6.12 | 9.88 | 15.88 | 18.88 |
| • | • | • | TC-3 | 30A | 30A-600V | J | 5.75 | 6.12 | 9.88 | 15.88 | 18.88 |
| • | • | • | TD-1 | 60A | No Fuse | — | 6.38 | 6.75 | 10.75 | 16.75 | 19.75 |
| • | • | • | TD-2 | 60A | 30A-600V | H, K, R | 8.50 | 6.75 | 10.75 | 16.75 | 19.75 |
| • | • | • | TD-2 | 60A | 60A-250V | H, K, R | 6.50 | 6.75 | 10.75 | 16.75 | 19.75 |
| • | • | • | TD-3 | 60A | 60A-600V | H, K, R | 9.00 | 6.75 | 10.75 | 16.75 | 19.75 |
| • | • | • | TD-3 | 60A | 60A-600V | J | 6.38 | 6.75 | 10.75 | 16.75 | 19.75 |
| • | • | • | TE-1 | 100A | No Fuse | — | 4.75 | 8.50 | 10.50 | 16.50 | 19.50 |
| • | • | • | TE-2 | 100A | 100A-250V | H, K, R | 7.50 | 8.50 | 10.50 | 16.50 | 19.50 |
| • | • | • | TE-2 | 100A | 100A-600V | H, K, R | 9.50 | 8.50 | 10.50 | 16.50 | 19.50 |
| • | • | • | TE-2 | 100A | 100A-600V | J | 6.25 | 8.50 | 10.50 | 16.50 | 19.50 |
| • | • | • | TE-3 | 100A | 200A-600V | J | 13.75 | 8.50 | 10.50 | 16.50 | 19.50 |
| • | • | • | TF-1 | 200A | No Fuse | — | 5.50 | 11.75 | 9.12 | 15.12 | 18.12 |
| • | • | • | TF-2 | 200A | 200A-250V | H, K, R | 11.50 | 11.75 | 9.12 | 15.12 | 18.12 |
| • | • | • | TF-2 | 200A | 200A-600V | H, K, R | 14.00 | 11.75 | 9.12 | 15.12 | 18.12 |
| • | • | • | TF-2 | 200A | 200A-600V | J | 10.12 | 11.75 | 9.12 | 15.12 | 18.12 |
| • | • | • | TF-3 | 200A | 400A-600V | J | 14.50 | 11.75 | 9.12 | 15.12 | 18.12 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 | col10 | col11 |
|---|---|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Square D Type Number | Amp Rating | Frame Type | Space Occupied | Space Occupied | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| 72.13 | 84.13 | 90.13 | Square D Type Number | Amp Rating | Frame Type | L | M | When A=72.13 P | When A=84.13 P | When A=90.13 P |
| • | • | • | RG-1 | 75A | GJL | 3.53 | 3.87 | 10.69 | 16.69 | 19.69 |
| • | • | • | RG-1 | 100A | GJL | 3.53 | 3.87 | 10.69 | 16.69 | 19.69 |
| • | • | • | RN-1 | 100A | FAL, FHL | 5.12 | 5.38 | 10.88 | 16.88 | 19.88 |
| • | • | • | RP-1 | 250A | KAL, KHL | 7.12 | 5.75 | 11.56 | 17.56 | 20.56 |
| • | • | RR-1 | 400A | LAL, LHL, Q4L | 7.62 | 8.88 | — | 13.25 | 16.25 | |
| • | • | RT-1 | 800A | MEL, MXL | 9.12 | 12.00 | — | 13.12 | 16.12 | |
| • | • | RT-1 | 1000A | MAL, MHL | 9.12 | 12.00 | — | 13.12 | 16.12 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 | col9 |
|---|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Square D Type Number | Amp | Disconnect Height "X" | Disconnect Width "Y" | ||
| 72.13 | 84.13 | 90.13 | Square D Type Number | Rating | Fuse Clip | Fuse Class | Disconnect Height "X" | Disconnect Width "Y" |
| • | • | • | TCN-30 | 30A | No Fuse | — | 5.90 | 6.20 |
| • | • | • | TCF-30 | 30A | 30A-250V | H, K, R | 7.50 | 6.20 |
| • | • | • | TCF-33 | 30A | 30A-600V | H, K, R | 10.15 | 6.20 |
| • | • | • | TCF-33 | 30A | 60A-250V | H, K, R | 8.15 | 6.20 |
| • | • | • | TCF-33 | 30A | 30A-600V | J | 7.50 | 6.20 |
| • | • | • | TDN-60 | 60A | No Fuse | — | 5.90 | 6.20 |
| • | • | • | TDF-60 | 60A | 30A-600V | H, K, R | 10.15 | 6.20 |
| • | • | • | TDF-60 | 60A | 60A-250V | H, K, R | 8.15 | 6.20 |
| • | • | • | TDF-63 | 60A | 60A-600V | H, K, R | 10.65 | 6.20 |
| • | • | • | TDF-63 | 60A | 60A-600V | J | 7.50 | 6.20 |
| • | • | • | TEN-10 | 100A | No Fuse | — | 5.90 | 6.20 |
| • | • | • | TEF-10 | 100A | 100A-250V | H, K, R | 10.35 | 6.20 |
| • | • | • | TEF-10 | 100A | 100A-600V | H, K, R | 10.35 | 6.20 |
| • | • | • | TEF-10 | 100A | 100A-600V | J | 10.35 | 6.20 |
UHD
| col1 | col2 | col3 | col4 | col5 | col6 | col7 | col8 |
|---|---|---|---|---|---|---|---|
| Fits Enclosure Height | Fits Enclosure Height | Fits Enclosure Height | Amp | Circuit Breaker | Circuit Breaker | ||
| 72.13 | 84.13 | 90.13 | Cable Type Switch | Rating | Frame Type | Height "X" | Width "Y" |
| • | • | • | 9422 CGJ30 | 75A | GJL | 4.75 | 3.50 |
| • | • | • | 9422 CEJ30 | 100A | GJL | 4.75 | 3.50 |
| • | • | • | 9422 CFA30 | 100A | FAL, FHL | 6.00 | 4.50 |
| • | • | • | 9422 CKA30 | 250A | KAL, KHL | 8.00 | 4.50 |
| • | • | • | 9422 CLA30 | 400A | LAL, LHL,Q4L | 11.00 | 6.00 |